Compare commits

..
4 Commits
Author SHA1 Message Date
m3ta-chironandClaude Opus 5.5 04a563ee3e fix(agents): let hosts override the agent SSH key path
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 08:00:24 +01:00
m3ta-chironandClaude Opus 5.5 071161b6d6 feat(t3code): move agent identity overlay here, support two Gitea instances
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 08:00:24 +01:00
m3ta-chironandClaude Opus 5.5 f683e8bf43 feat(t3code): add NixOS module bound to the NetBird interface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 08:00:24 +01:00
m3ta-chironandClaude Opus 5.5 3d4a39dc74 docs(t3code): add design and implementation plan
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 08:00:24 +01:00
9 changed files with 773 additions and 3 deletions

No files matched your search

@@ -0,0 +1,139 @@
# T3 Code als NixOS-Modul: Implementierungsplan
> **For agentic workers:** REQUIRED SUB-SKILL: Use superpowers:subagent-driven-development (recommended) or superpowers:executing-plans to implement this plan task-by-task. Steps use checkbox (`- [ ]`) syntax for tracking.
**Goal:** T3 Code läuft aus einem Modul in m3ta-home auf m3-kratos und AZ-LT-NIX, folgt dem aktiven NetBird-Profil, und T3-Agents arbeiten auf beiden Gitea-Instanzen als `m3ta-chiron`.
**Architecture:** m3ta-home exportiert `nixosModules.t3code` und `overlays.t3code-agent-identity`. `nixos-config` und AZ-NIX-CLIENTS binden beides ein und liefern pro Host nur `enable`, `user`, `port` und Secrets.
**Tech Stack:** Nix Flakes, NixOS-Module, systemd, agenix, tea, NetBird 0.81.
**Spec:** `docs/superpowers/specs/2026-11-02-t3code-nixos-module-design.md`
## Global Constraints
- Secret-Pfade: `/run/agenix/agent-gitea-token-m3ta` und `/run/agenix/agent-gitea-token-az`.
- Instanzen: `m3ta` = `https://code.m3ta.dev`, SSH-Port 22; `az` = `https://git.az-gruppe.com`, SSH-Port 2022; SSH-User jeweils `gitea`.
- Identität: `m3ta-chiron` / `m3ta-chiron@agentmail.to`; Schlüssel `~/.ssh/m3ta-chiron`.
- Host-Keys: `code.m3ta.dev ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFmmqZ4GgDEXJgj8uYrZAr/EoLIA6LJGkTIyKGQD/60a` und `[git.az-gruppe.com]:2022 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIItSijmU5YwcJcoshtmYxpxBaVA4TPaCMk23ws7KDkAH`.
- Port-Default `3773`; Interface-Default `wt0`.
- Kein `switch`, kein Push und kein Merge ohne ausdrückliche Freigabe. Arbeit in jedem Repo auf dem Branch `feat/t3code-module`.
- `nixos-config` nur in einem Worktree auf Basis von `origin/master` ändern; `secrets/rustfs-secret-key.age` im Hauptcheckout bleibt unberührt.
- Tokens nie in Logs, Testausgaben oder den Nix-Store.
## Review Focus
- `wt0` ist beim Dienststart da, hat aber noch keine IPv4: Das Skript wartet höchstens 60 Sekunden und bindet nie an `0.0.0.0` (Test Task 1).
- Nur ein Token ist lesbar: Genau dieser Login wird erzeugt und trägt `default: true` (Test Task 2).
- Kein Token ist lesbar: `tea` läuft ohne Login weiter, ohne Abbruch im Wrapper (Test Task 2).
- `user` fehlt oder NetBird ist aus: Die Evaluation scheitert mit klarer Meldung statt zur Laufzeit (Test Task 1).
- Git-Remote auf `git.az-gruppe.com`: SSH nutzt Port 2022 und `m3ta-chiron`, andere Hosts weiter `~/.ssh/config` (Test Task 2).
---
### Task 0: Voraussetzungen durch Sascha
Nicht durch Agents ausführbar. Task 1 hängt nur an Schritt 1, Task 4 und 5 auch an den Secrets.
- [ ] **Step 1: `wt0`-Verhalten prüfen.** Zweites Profil anlegen, wechseln und `ip monitor link dev wt0` beobachten. Erwartet: `wt0` verschwindet und entsteht neu. Sonst bekommt Task 1 den in der Spec genannten `ip monitor`-Watcher.
- [ ] **Step 2: Schlüssel und Tokens.** Tabelle „Voraussetzungen“ der Spec abarbeiten.
- [ ] **Step 3: `.age`-Dateien** laut Tabelle „Secrets“ der Spec erzeugen, nachdem Task 4 und 5 die `secrets.nix`-Einträge ergänzt haben.
### Task 1: NixOS-Modul
**Files:**
- Create: `modules/nixos/t3code.nix`
- Create: `modules/nixos/t3code.test.sh`
- Modify: `flake.nix`
**Interfaces:**
- Produces: `nixosModules.t3code` mit den Optionen `m3ta.t3code.{enable,user,port,interface,package}` aus der Spec.
- [ ] **Step 1: Test schreiben.** `t3code.test.sh` evaluiert das Modul per `nixpkgs.lib.nixosSystem` mit einem Stub-`llm-agents.t3code` (Stil wie `profiles/sets/coding/agents/ai-memory.test.sh`) und prüft:
- `bindsTo` und `wantedBy` enthalten `sys-subsystem-net-devices-wt0.device`
- `serviceConfig.User` ist `alice`, `environment.T3CODE_PORT` ist `"3773"`, `HOME` ist `/home/alice`
- `networking.firewall.interfaces.wt0.allowedTCPPorts` ist `[3773]`
- ohne `services.netbird.enable` scheitert der Build von `system.build.toplevel` mit `m3ta.t3code requires services.netbird.enable`
- ohne `user` scheitert die Evaluation
- `enable = false` erzeugt keinen Dienst
- [ ] **Step 2: Startskript-Test ergänzen.** Das Skript mit einem Stub für `ip` und `t3` starten. Liefert der Stub sofort eine Adresse, ist der `t3`-Aufruf `serve --host 100.1.2.3`. Liefert er keine, endet das Skript mit Exit 1 (Timeout im Test per `T3CODE_ADDR_TIMEOUT=1`, Default `60`) und ruft `t3` nicht auf.
- [ ] **Step 3: Test ausführen.** `bash modules/nixos/t3code.test.sh`; erwartet: FAIL, weil das Modul fehlt.
- [ ] **Step 4: Modul schreiben** laut Abschnitt „Modul“ der Spec. Startskript per `pkgs.writeShellApplication`, Adresse per `ip -4 -o addr show dev <interface>`, Aufruf mit `exec`. In `flake.nix`: `nixosModules.t3code = ./modules/nixos/t3code.nix`.
- [ ] **Step 5: Test ausführen.** Erwartet: PASS.
- [ ] **Step 6: Commit** `feat(t3code): add NixOS module bound to the NetBird interface`.
### Task 2: Identitäts-Overlay mit zwei Instanzen
**Files:**
- Create: `overlays/t3code-agent-identity.nix`
- Create: `overlays/t3code-agent-identity.test.sh`
- Modify: `flake.nix`
**Interfaces:**
- Produces: `overlays.t3code-agent-identity`. Die Datei ist `{tokenFiles ? {}}: final: prev: {…}`; die Instanzliste steht in der Datei, `tokenFiles` überschreibt Token-Pfade pro Instanzname (für Tests). Der Flake exportiert die Standardanwendung und behält `inputs.m3ta-nixpkgs.overlays` per `//`.
- [ ] **Step 1: Test schreiben.** Overlay mit Test-Instanzen und temporären Token-Dateien anwenden, gegen einen Stub-`llm-agents.t3code` bauen und prüfen:
- beide Tokens lesbar: `tea logins` listet `m3ta` und `az` mit ihren URLs
- nur `az` lesbar: nur `az`, mit `default: true`
- keiner lesbar: `tea logins` endet mit Exit 0 und leerer Liste
- ein gefälschtes Token taucht nach dem Lauf nirgends unter `$TMPDIR` auf (Temp-Verzeichnis aufgeräumt) und nicht im Closure (`nix-store -qR` + `grep`)
- `ssh -F <config> -G git.az-gruppe.com`: `port 2022`, `user gitea`, `identityfile ~/.ssh/m3ta-chiron`
- `ssh -F <config> -G code.m3ta.dev`: `port 22`, `user gitea`, gleicher Schlüssel
- `ssh -F <config> -G example.org` mit Test-`HOME` und eigener `~/.ssh/config`: nutzt deren Werte, kein `m3ta-chiron`
- im Wrapper sind `GIT_AUTHOR_NAME` und `GIT_COMMITTER_NAME` `m3ta-chiron`
- [ ] **Step 2: Test ausführen.** Erwartet: FAIL.
- [ ] **Step 3: Overlay schreiben.** Aus `git show origin/master:overlays/default.nix` in `nixos-config` übernehmen (`t3code-agent-identity`) und nur die festen Werte durch `instances` ersetzen. Der Rest-Block wird `Host * !code.m3ta.dev !git.az-gruppe.com`, aus `instances` erzeugt. Beibehalten: privates Temp-Verzeichnis pro Aufruf und der Kommentar zum `IdentityFile`-Verhalten.
- [ ] **Step 4: Test ausführen.** Erwartet: PASS.
- [ ] **Step 5: Commit** `feat(t3code): move agent identity overlay here, support two Gitea instances`.
### Task 3: `gitIdentity.sshKey` überschreibbar
**Files:**
- Modify: `profiles/sets/coding/agents/agents.nix:16`
- [ ] **Step 1: Ändern.** `sshKey = lib.mkDefault "/home/m3tam3re/.ssh/gitea"`, `lib` in die Modulargumente aufnehmen.
- [ ] **Step 2: Prüfen.** Aus AZ-NIX-CLIENTS: `nix eval --raw --override-input m3ta-home path:<m3ta-home> .#nixosConfigurations.AZ-LT-NIX.config.home-manager.users."sascha.koenig".coding.agents.gitIdentity.sshKey`. Erwartet: `/home/m3tam3re/.ssh/gitea`, also unverändert ohne Override.
- [ ] **Step 3: Commit** `fix(agents): let hosts override the agent SSH key path`.
### Task 4: AZ-NIX-CLIENTS einbinden
**Files** (Repo `AZ-NIX-CLIENTS`):
- Modify: `hosts/common/default.nix` (Overlay nach `llm-agents-overrides`, Modul-Import)
- Modify: `hosts/common/ports.nix` (`t3code = 3773`)
- Modify: `hosts/common/users/sascha.koenig.nix` (`coding.agents.gitIdentity.sshKey = "/home/sascha.koenig/.ssh/m3ta-chiron"` in den AZ-LT-NIX-Flags)
- Modify: `hosts/AZ-LT-NIX/services/default.nix` oder neue `services/t3code.nix` (`m3ta.t3code`)
- Modify: `hosts/AZ-LT-NIX/secrets.nix`, `secrets.nix`
**Interfaces:**
- Consumes: `nixosModules.t3code`, `overlays.t3code-agent-identity`.
- [ ] **Step 1: Änderungen ohne Secrets einbauen.** `m3ta.t3code = { enable = true; user = "sascha.koenig"; port = config.m3ta.ports.get "t3code"; };`
- [ ] **Step 2: Bauen.** `nixos-rebuild build --flake .#AZ-LT-NIX --override-input m3ta-home path:<m3ta-home>`; erwartet: Erfolg.
- [ ] **Step 3: Werte prüfen.** Per `nix eval`: `systemd.services.t3code.serviceConfig.User` ist `sascha.koenig`, `gitIdentity.sshKey` ist der neue Pfad.
- [ ] **Step 4: Thin Client prüfen.** `nix eval .#nixosConfigurations.AZ-TC-01.config.systemd.services.t3code.enable` mit Override: Fehler oder fehlender Dienst; der Host bekommt keinen T3-Dienst.
- [ ] **Step 5: Commit** `feat(AZ-LT-NIX): run T3 Code from the m3ta-home module`.
- [ ] **Step 6: Secret-Einträge ergänzen,** sobald Saschas `.age`-Dateien da sind (Rezept: `publicKeys` aus der Spec), bauen, Commit `feat(AZ-LT-NIX): add agent Gitea tokens`.
### Task 5: nixos-config umstellen
**Files** (Repo `nixos-config`, Worktree auf `origin/master`):
- Modify: `hosts/common/default.nix`, `overlays/default.nix` (lokales Overlay entfernen, das aus m3ta-home einbinden, Modul-Import)
- Delete: `hosts/m3-kratos/services/t3code.nix`
- Modify: `hosts/m3-kratos/services/default.nix`, `hosts/m3-kratos/secrets.nix`, `hosts/m3-hermes/secrets.nix`, `hosts/m3-hermes/services/t3code.nix` (Kommentar zum Secret-Namen), `secrets.nix`
**Interfaces:**
- Consumes: wie Task 4.
- [ ] **Step 1: Worktree anlegen** und Modul sowie Overlay einbinden. Für m3-kratos: `m3ta.t3code` laut Spec.
- [ ] **Step 2: Bauen.** m3-kratos und m3-hermes mit `--override-input m3ta-home path:<m3ta-home>`; erwartet: Erfolg.
- [ ] **Step 3: Prüfen.** m3-hermes-`ExecStart` enthält weiter `--host 0.0.0.0`. m3-kratos-`ExecStart` enthält keine feste IP mehr.
- [ ] **Step 4: Commit** `refactor(m3-kratos): use the T3 Code module from m3ta-home`.
- [ ] **Step 5: Secrets umstellen,** sobald Saschas `.age`-Dateien da sind: `hermes-gitea-token` durch `agent-gitea-token-m3ta` ersetzen, `agent-gitea-token-az` nur auf m3-kratos. `git grep hermes-gitea-token` ist danach leer. Bauen, Commit `refactor(secrets): rename agent Gitea tokens per instance`.
### Task 6: Abschluss und Rollout
Pushes, Lock-Updates und `switch` nur nach ausdrücklicher Freigabe.
- [ ] **Step 1:** m3ta-home mergen und pushen, in beiden Repos `nix flake update m3ta-home`, ohne Override erneut bauen.
- [ ] **Step 2:** Deployment auf AZ-LT-NIX, dann m3-kratos; m3-hermes erhält nur den Secret-Wechsel.
- [ ] **Step 3: Kriterien 2 bis 6 der Spec prüfen.** Je Profil `ss -ltnp | grep 3773` zeigt die aktuelle NetBird-IP. Je Instanz ein Testcommit aus einer T3-Session (`git log -1 --format='%an %cn'`), Push und `tea repos`. Pairing pro Netz prüfen und das Ergebnis in die Spec schreiben.
@@ -0,0 +1,197 @@
# T3 Code als NixOS-Modul in m3ta-home
## Ziel
Der T3-Code-Server wird einmal in m3ta-home definiert statt pro Host. Er läuft auf
m3-kratos (`nixos-config`) und AZ-LT-NIX (`AZ-NIX-CLIENTS`) und ist nur aus dem
gerade aktiven NetBird-Netz erreichbar. Zwischen privatem und Firmen-Control-Server
wird zur Laufzeit per NetBird-Profil gewechselt, ohne Rebuild. Von T3 gestartete
Agents committen auf beiden Hosts als `m3ta-chiron`.
## Erfolgskriterien
1. Beide Hosts bauen mit `m3ta.t3code.enable = true`; pro Host sind nur `enable` und `user` nötig.
2. Nach `netbird up --profile <name>` lauscht T3 Code auf der neuen NetBird-IP, ohne manuellen Eingriff.
3. Der Port ist nur über `wt0` offen, und der Server bindet nie an eine andere Adresse.
4. Ein Commit aus einer T3-Session auf AZ-LT-NIX hat `m3ta-chiron` als Author und Committer.
5. Pushes aus einer T3-Session nach `code.m3ta.dev` und `git.az-gruppe.com` nutzen `~/.ssh/m3ta-chiron`.
6. Tea nutzt in Repos beider Instanzen den passenden Token.
## Nicht im Umfang
- m3-hermes behält seinen Dienst und seine Agent-Runtime. Der Host bekommt nur das Overlay aus der neuen Quelle.
- Beide NetBird-Netze gleichzeitig (`services.netbird.clients`).
- Deklarative NetBird-Profile: Sie enthalten die Peer-Registrierung und bleiben imperativ.
- Die übrige NetBird-Konfiguration der Hosts.
## Modul
`modules/nixos/t3code.nix`, exportiert als `nixosModules.t3code`.
| Option | Typ | Default |
| --- | --- | --- |
| `m3ta.t3code.enable` | bool | `false` |
| `m3ta.t3code.user` | str | keiner (Pflichtfeld) |
| `m3ta.t3code.port` | port | `3773` |
| `m3ta.t3code.interface` | str | `"wt0"` |
| `m3ta.t3code.package` | package | `pkgs.llm-agents.t3code` |
Eine Assertion verlangt `services.netbird.enable = true`.
`systemd.services.t3code`:
- Läuft als `user` mit Gruppe `users`; `HOME` und `WorkingDirectory` kommen aus `config.users.users.<user>.home`.
- `T3CODE_PORT` kommt aus `port`.
- `path` enthält `/etc/profiles/per-user/<user>` und `/run/current-system/sw`.
- `Restart = "on-failure"`, `RestartSec = 5`.
- `bindsTo`, `after` und `wantedBy` zeigen auf `sys-subsystem-net-devices-<interface>.device`.
- `after` enthält zusätzlich `netbird.service`.
Das Startskript wartet auf die IPv4-Adresse des Interface und führt dann
`t3 serve --host <ip>` per `exec` aus. Kommt innerhalb von 60 Sekunden keine Adresse,
beendet es sich mit Fehler und `Restart` versucht es erneut.
Die Firewall öffnet `networking.firewall.interfaces.<interface>.allowedTCPPorts = [port]`.
Der Import steht in `hosts/common` beider Repos, `enable` und `user` in der Host-Konfiguration.
## Profilwechsel
Die Profile werden einmal pro Host angelegt:
```bash
netbird profile add private
netbird up --profile private --management-url https://<privater-server>
```
Danach genügt `netbird up --profile <name>`. Das Profil `default` ist auf AZ-LT-NIX
der Firmen-Server. `wt0` verschwindet beim Wechsel und entsteht neu, dadurch startet
der Dienst über die Device-Unit neu.
**Annahme, vor der Implementierung zu prüfen:** Dieses Verhalten von `wt0` ist nicht
getestet. Bleibt `wt0` beim Wechsel bestehen, kommt eine Überwachung von
Adressänderungen dazu (`ip monitor address dev wt0`), die den Dienst neu startet.
T3-Clients brauchen pro Netz einen eigenen Eintrag und müssen im selben Netz sein.
Ob pro Adresse neu gepairt werden muss, wird beim Rollout geprüft.
## Agent-Identität
Das Overlay `t3code-agent-identity` wandert aus `nixos-config/overlays/default.nix`
nach m3ta-home und wird als `overlays.t3code-agent-identity` zusätzlich zu den
`m3ta-nixpkgs`-Overlays exportiert. Beide Repos binden es nach
`llm-agents.overlays.shared-nixpkgs` ein, AZ-NIX-CLIENTS zusätzlich nach
`llm-agents-overrides`. Es umhüllt `t3code` und `t3code-desktop`, also gilt die
Identität auch für die Desktop-App.
Die Identität gilt nur für Prozesse, die T3 startet. Die globale Git-Konfiguration
auf AZ-LT-NIX bleibt `Sascha König`. Author und Committer gelten für jedes Remote.
### Mehrere Gitea-Instanzen
`m3ta-chiron` existiert auf zwei Instanzen, jede mit eigenem Token. Das Overlay
bekommt dafür eine Instanzliste statt der festen Werte für `code.m3ta.dev`:
| Name | URL | SSH | Token-Datei |
| --- | --- | --- | --- |
| `m3ta` | `https://code.m3ta.dev` | `gitea@code.m3ta.dev:22` | `/run/agenix/agent-gitea-token-m3ta` |
| `az` | `https://git.az-gruppe.com` | `gitea@git.az-gruppe.com:2022` | `/run/agenix/agent-gitea-token-az` |
Daraus erzeugt das Overlay:
- **tea:** Der Wrapper schreibt pro lesbarer Token-Datei einen Login. Tea wählt den Login selbst anhand des Hosts im Git-Remote (`MatchLogins`), der Token geht also nur an seine Instanz. Fehlt eine Datei, entfällt nur dieser Login. `default: true` trägt der erste erzeugte Login.
- **SSH:** Pro Instanz ein `Host`-Block mit `User gitea`, Port, `IdentityFile ~/.ssh/m3ta-chiron` und `IdentitiesOnly yes`. Alle anderen Hosts nutzen weiter `~/.ssh/config`.
- **Known Hosts:** Die Host-Keys beider Instanzen, für `git.az-gruppe.com` als `[git.az-gruppe.com]:2022`.
Eine Instanz, die nicht in der Liste steht, bekommt weder SSH-Einstellungen noch Token.
Beide Accounts nutzen denselben Schlüssel `~/.ssh/m3ta-chiron` pro Host.
### Secrets
Pro Instanz gibt es eine eigene Datei, damit sich Tokens einzeln rotieren lassen und
der Arbeits-Token nur auf den Hosts liegt, die ihn brauchen.
| Repo | Datei | `publicKeys` | Hosts |
| --- | --- | --- | --- |
| AZ-NIX-CLIENTS | `secrets/agent-gitea-token-m3ta.age` | `[AZ-LT-NIX sascha.koenig]` | AZ-LT-NIX |
| AZ-NIX-CLIENTS | `secrets/agent-gitea-token-az.age` | `[AZ-LT-NIX sascha.koenig]` | AZ-LT-NIX |
| nixos-config | `secrets/agent-gitea-token-m3ta.age` | wie bisher `hermes-gitea-token` | m3-kratos, m3-hermes |
| nixos-config | `secrets/agent-gitea-token-az.age` | `[m3-kratos] ++ users` | m3-kratos |
m3-hermes bekommt den Arbeits-Token nicht.
In nixos-config ersetzt die neue Datei `hermes-gitea-token.age`; der Inhalt bleibt
gleich. Alle Tokens gehören dem Account `m3ta-chiron` der jeweiligen Instanz.
### Voraussetzungen
| Was | Wie | Durch |
| --- | --- | --- |
| `~/.ssh/m3ta-chiron` auf AZ-LT-NIX | `ssh-keygen -t ed25519 -N "" -C chiron-t3-az-lt-nix -f ~/.ssh/m3ta-chiron` | Sascha |
| `~/.ssh/m3ta-chiron` auf m3-kratos | Vorhandenen Schlüssel prüfen, sonst wie oben mit `-C chiron-t3-m3-kratos` anlegen | Sascha |
| Public Keys | Beide Hosts beim Account `m3ta-chiron` auf beiden Instanzen eintragen | Sascha |
| Erreichbarkeit | Von m3-kratos `ssh -T -p 2022 gitea@git.az-gruppe.com` testen | Sascha |
| Tokens und `.age`-Dateien | Pro Instanz einen Token erzeugen und mit `agenix -e` verschlüsseln | Sascha |
| agenix-Einträge in den Host-`secrets.nix` | Owner ist der jeweilige T3-User | Implementierung |
### Korrektur an `coding.agents.gitIdentity`
`profiles/sets/coding/agents/agents.nix` setzt `sshKey` fest auf
`/home/m3tam3re/.ssh/gitea`. Auf AZ-LT-NIX steht dieser Pfad deshalb schon heute in
`GIT_SSH_COMMAND` in `hm-session-vars.sh`, obwohl die Datei dort nicht existiert.
- `agents.nix` setzt den Wert per `lib.mkDefault`.
- AZ-LT-NIX setzt `coding.agents.gitIdentity.sshKey = "/home/sascha.koenig/.ssh/m3ta-chiron"`.
Dieselbe `gitIdentity` exportiert `GIT_AUTHOR_*` und `GIT_SSH_COMMAND` für alle Shells,
die `hm-session-vars.sh` laden. In Nushell sind die Variablen nicht gesetzt. In Shells,
die die Datei laden, committet und pusht auf AZ-LT-NIX also auch manuelles Git als
`m3ta-chiron`. Dieses Verhalten bleibt unverändert.
## Änderungen pro Repo
**m3ta-home**
- Neu: `modules/nixos/t3code.nix`
- `flake.nix`: Outputs `nixosModules.t3code` und `overlays.t3code-agent-identity`
- `agents.nix`: `sshKey` per `mkDefault`
**nixos-config**
- Flake-Input `m3ta-home` aktualisieren, Modul und Overlay aus m3ta-home einbinden
- Lokales Overlay und `hosts/m3-kratos/services/t3code.nix` entfernen
- m3-kratos: `m3ta.t3code = { enable = true; user = "m3tam3re"; port = config.m3ta.ports.get "t3code"; };`
- `hermes-gitea-token` durch `agent-gitea-token-m3ta` ersetzen (`secrets.nix`, m3-kratos, m3-hermes)
- `agent-gitea-token-az` ergänzen (`secrets.nix`, m3-kratos)
**AZ-NIX-CLIENTS**
- Flake-Input `m3ta-home` aktualisieren, Modul und Overlay einbinden
- `t3code = 3773` in `hosts/common/ports.nix`
- AZ-LT-NIX: `m3ta.t3code`, `gitIdentity.sshKey`, beide Secret-Einträge
- `secrets.nix`: Einträge für beide Tokens
Der lokale `nixos-config`-Klon ist 112 Commits hinter `origin/master` und hat eine
lokale Änderung an `secrets/rustfs-secret-key.age`. Die Arbeit dort startet in einem
eigenen Worktree auf Basis von `origin/master`.
## Reihenfolge
1. Prüfung des `wt0`-Verhaltens durch Sascha, weil die Firmenverbindung dabei kurz wegfällt.
2. m3ta-home implementieren.
3. Beide Hosts mit `--override-input m3ta-home path:…` bauen, ohne `switch`.
4. Schlüssel und Secret für AZ-LT-NIX anlegen (siehe Voraussetzungen).
5. Deployment auf AZ-LT-NIX, dann m3-kratos.
## Fehlerfälle
- **Keine Adresse auf `wt0`:** Das Startskript scheitert nach 60 Sekunden, systemd versucht es erneut.
- **NetBird getrennt:** Der Dienst stoppt mit `wt0` und startet nur mit `wt0` wieder. T3 Code ist dann offline, aber nie außerhalb des Mesh erreichbar.
- **Schlüssel fehlt:** Der Push zu einer der beiden Instanzen scheitert, es gibt keinen Rückfall auf einen persönlichen Schlüssel.
- **Token fehlt:** T3 erkennt die betroffene Instanz nicht als Gitea. Commits und Pushes funktionieren weiter, Change Requests nicht. Die andere Instanz ist nicht betroffen.
## Prüfung
- `nix eval` und `nixos-rebuild build` für AZ-LT-NIX und m3-kratos.
- Nach dem Deployment: Kriterien 2 bis 6, je Profil mit `ss -ltnp`, je Instanz mit einem Testcommit und `tea repos`.
+10 -2
View File
@@ -50,6 +50,10 @@
selfPath = self.outPath; selfPath = self.outPath;
}; };
# NixOS modules — import in nixos-config via:
# imports = [ inputs.m3ta-home.nixosModules.t3code ];
nixosModules.t3code = ./modules/nixos/t3code.nix;
# Library functions — use in nixos-config via: # Library functions — use in nixos-config via:
# m3ta-lib = inputs.m3ta-home.lib; # m3ta-lib = inputs.m3ta-home.lib;
# imports = [ (m3ta-lib.mkHome { ... }) ]; # imports = [ (m3ta-lib.mkHome { ... }) ];
@@ -58,7 +62,11 @@
selfPath = self.outPath; selfPath = self.outPath;
}; };
# Overlays (re-exports from m3ta-nixpkgs) # Overlays (re-exports from m3ta-nixpkgs, plus our own)
overlays = inputs.m3ta-nixpkgs.overlays; overlays =
inputs.m3ta-nixpkgs.overlays
// {
t3code-agent-identity = import ./overlays/t3code-agent-identity.nix {};
};
}; };
} }
+23
View File
@@ -0,0 +1,23 @@
# Start T3 Code on the interface's current IPv4 address. The address changes
# with the NetBird profile, so it cannot be a Nix value.
# Usage: t3code-serve.sh <interface> <t3 binary>
interface="$1"
t3="$2"
timeout="${T3CODE_ADDR_TIMEOUT:-60}"
address=""
for ((waited = 0; waited < timeout; waited++)); do
line="$(ip -4 -o addr show dev "$interface" 2>/dev/null || true)"
if [[ "$line" =~ inet[[:space:]]+([0-9.]+)/ ]]; then
address="${BASH_REMATCH[1]}"
break
fi
sleep 1
done
if [[ -z "$address" ]]; then
echo "no IPv4 address on $interface after ${timeout}s" >&2
exit 1
fi
exec "$t3" serve --host "$address"
+94
View File
@@ -0,0 +1,94 @@
# T3 Code server, reachable from the active NetBird network only.
#
# The service follows the mesh interface: it stops when NetBird removes the
# interface and starts again with the new address when a profile comes up
# (`netbird up --profile <name>`). It owns ~/.t3, so a desktop app on the same
# host must connect as a client with its local environment off.
#
# Wanted by the device rather than multi-user.target, so a host without NetBird
# connection does not wait for it at boot. A first deploy with the interface
# already up needs one `systemctl start t3code`.
{
config,
lib,
pkgs,
utils,
...
}: let
cfg = config.m3ta.t3code;
device = "${utils.escapeSystemdPath "/sys/subsystem/net/devices/${cfg.interface}"}.device";
home = config.users.users.${cfg.user}.home;
serve = pkgs.writeShellApplication {
name = "t3code-serve";
runtimeInputs = [pkgs.iproute2 pkgs.coreutils];
text = builtins.readFile ./t3code-serve.sh;
};
in {
options.m3ta.t3code = {
enable = lib.mkEnableOption "the T3 Code server on the NetBird interface";
user = lib.mkOption {
type = lib.types.str;
description = "User running the server; the harnesses come from this user's profile.";
example = "m3tam3re";
};
port = lib.mkOption {
type = lib.types.port;
default = 3773;
description = "Port for the HTTP/WebSocket server.";
};
interface = lib.mkOption {
type = lib.types.str;
default = "wt0";
description = "NetBird interface to bind to and open the port on.";
};
package = lib.mkOption {
type = lib.types.package;
default = pkgs.llm-agents.t3code;
defaultText = lib.literalExpression "pkgs.llm-agents.t3code";
description = "T3 Code package.";
};
};
config = lib.mkIf cfg.enable {
assertions = [
{
assertion = config.services.netbird.enable;
message = "m3ta.t3code requires services.netbird.enable";
}
];
systemd.services.t3code = {
description = "T3 Code server";
after = [device "netbird.service"];
bindsTo = [device];
wantedBy = [device];
serviceConfig = {
User = cfg.user;
Group = "users";
WorkingDirectory = home;
ExecStart = "${serve}/bin/t3code-serve ${cfg.interface} ${cfg.package}/bin/t3";
Restart = "on-failure";
RestartSec = "5";
};
environment = {
T3CODE_PORT = toString cfg.port;
HOME = home;
};
# The harnesses come from the user's profile, not from the service.
path = [
"/etc/profiles/per-user/${cfg.user}"
"/run/current-system/sw"
];
};
networking.firewall.interfaces.${cfg.interface}.allowedTCPPorts = [cfg.port];
};
}
+99
View File
@@ -0,0 +1,99 @@
#!/usr/bin/env bash
# Eval and start-script checks for nixosModules.t3code.
# Usage: t3code.test.sh
set -euo pipefail
here="$(cd "$(dirname "$0")" && pwd)"
repo="$(cd "$here/../.." && pwd)"
fail=0
check() { # name, got, want
if [[ "$2" == "$3" ]]; then echo "ok $1"; else echo "FAIL $1: got '$2', want '$3'"; fail=1; fi
}
contains() { # name, haystack, needle
if [[ "$2" == *"$3"* ]]; then echo "ok $1"; else echo "FAIL $1: missing '$3' in '$2'"; fail=1; fi
}
# ev <module-attrs> <expression over `config`>; prints JSON, or the error on stderr.
ev() {
nix eval --impure --json --expr "
let
flake = builtins.getFlake \"path:$repo\";
system = flake.inputs.nixpkgs.lib.nixosSystem {
modules = [
flake.nixosModules.t3code
({pkgs, ...}: {
nixpkgs.hostPlatform = \"x86_64-linux\";
nixpkgs.overlays = [(final: prev: {llm-agents.t3code = final.hello;})];
boot.loader.grub.enable = false;
fileSystems.\"/\" = {device = \"none\"; fsType = \"tmpfs\";};
system.stateVersion = \"25.05\";
users.users.alice = {isNormalUser = true; home = \"/home/alice\";};
})
($1)
];
};
config = system.config;
in $2"
}
on='{services.netbird.enable = true; m3ta.t3code = {enable = true; user = "alice";};}'
dev="sys-subsystem-net-devices-wt0.device"
check "bindsTo" "$(ev "$on" 'config.systemd.services.t3code.bindsTo')" "[\"$dev\"]"
check "wantedBy" "$(ev "$on" 'config.systemd.services.t3code.wantedBy')" "[\"$dev\"]"
contains "after device" "$(ev "$on" 'config.systemd.services.t3code.after')" "$dev"
contains "after netbird" "$(ev "$on" 'config.systemd.services.t3code.after')" "netbird.service"
check "user" "$(ev "$on" 'config.systemd.services.t3code.serviceConfig.User')" '"alice"'
check "port env" "$(ev "$on" 'config.systemd.services.t3code.environment.T3CODE_PORT')" '"3773"'
check "home env" "$(ev "$on" 'config.systemd.services.t3code.environment.HOME')" '"/home/alice"'
check "firewall" "$(ev "$on" 'config.networking.firewall.interfaces.wt0.allowedTCPPorts')" '[3773]'
contains "path has user profile" \
"$(ev "$on" 'map toString config.systemd.services.t3code.path')" "/etc/profiles/per-user/alice"
custom='{services.netbird.enable = true; m3ta.t3code = {enable = true; user = "alice"; port = 4000; interface = "nb-x";};}'
check "custom port" "$(ev "$custom" 'config.networking.firewall.interfaces."nb-x".allowedTCPPorts')" '[4000]'
contains "custom interface" "$(ev "$custom" 'config.systemd.services.t3code.bindsTo')" 'nb\\x2dx.device'
check "disabled has no service" \
"$(ev '{services.netbird.enable = true;}' 'config.systemd.services ? t3code')" "false"
err="$(ev '{m3ta.t3code = {enable = true; user = "alice";};}' 'config.system.build.toplevel.drvPath' 2>&1 || true)"
contains "netbird assertion" "$err" "m3ta.t3code requires services.netbird.enable"
err="$(ev '{services.netbird.enable = true; m3ta.t3code.enable = true;}' 'config.systemd.services.t3code.serviceConfig.User' 2>&1 || true)"
contains "user is required" "$err" "m3ta.t3code.user"
# ── Start script, with stubs for ip and t3 ──
stubs="$(mktemp -d)"
trap 'rm -rf "$stubs"' EXIT
cat >"$stubs/t3" <<'EOF'
#!/usr/bin/env bash
echo "t3 $*"
EOF
chmod +x "$stubs/t3"
run() { # ip stub body
cat >"$stubs/ip" <<EOF
#!/usr/bin/env bash
$1
EOF
chmod +x "$stubs/ip"
PATH="$stubs:$PATH" T3CODE_ADDR_TIMEOUT=1 bash "$here/t3code-serve.sh" wt0 "$stubs/t3" 2>&1
}
check "binds the interface address" \
"$(run 'echo "5: wt0 inet 100.1.2.3/16 brd 100.1.255.255 scope global wt0"')" "t3 serve --host 100.1.2.3"
set +e
out="$(run 'exit 0')"; rc=$?
set -e
check "no address exits 1" "$rc" "1"
if [[ "$out" == *"t3 serve"* ]]; then echo "FAIL no address must not start t3: $out"; fail=1; else echo "ok no address does not start t3"; fi
set +e
out="$(run 'echo "Device does not exist" >&2; exit 1')"; rc=$?
set -e
check "missing interface exits 1" "$rc" "1"
exit "$fail"
+120
View File
@@ -0,0 +1,120 @@
# T3 Code agents act as the m3ta-chiron bot on every host. Baked into the
# T3 packages rather than a session or service: everything T3 spawns
# inherits it, however T3 was launched (desktop launcher, systemd, shell),
# and any host installing T3 gets it. Must come AFTER shared-nixpkgs.
#
# Push auth needs ~/.ssh/m3ta-chiron on each host, with its pubkey on the
# m3ta-chiron account of each Gitea instance. A missing key fails the push
# instead of falling back to a personal key. Other hosts keep the user's own
# ssh config.
#
# Change requests need one agenix secret per instance, owned by the T3 user.
# Without it T3 cannot recognize that instance as Gitea; the others still work.
{tokenFiles ? {}}: final: prev: let
identity = {
name = "m3ta-chiron";
email = "m3ta-chiron@agentmail.to";
};
instances = [
{
name = "m3ta";
url = "https://code.m3ta.dev";
host = "code.m3ta.dev";
port = 22;
knownHost = "code.m3ta.dev";
hostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFmmqZ4GgDEXJgj8uYrZAr/EoLIA6LJGkTIyKGQD/60a";
}
{
name = "az";
url = "https://git.az-gruppe.com";
host = "git.az-gruppe.com";
port = 2022;
knownHost = "[git.az-gruppe.com]:2022";
hostKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIItSijmU5YwcJcoshtmYxpxBaVA4TPaCMk23ws7KDkAH";
}
];
tokenFile = instance: tokenFiles.${instance.name} or "/run/agenix/agent-gitea-token-${instance.name}";
giteaKnownHosts = final.writeText "gitea-known-hosts" (
final.lib.concatMapStrings (instance: "${instance.knownHost} ${instance.hostKey}\n") instances
);
# ssh expands ~ from passwd, so this does not depend on $HOME.
sshConfig = final.writeText "t3-agent-ssh-config" ''
${final.lib.concatMapStrings (instance: ''
Host ${instance.host}
User gitea
Port ${toString instance.port}
IdentityFile ~/.ssh/m3ta-chiron
IdentitiesOnly yes
UserKnownHostsFile ${giteaKnownHosts}
'')
instances}
# Conditional: IdentityFile accumulates across matching blocks, so a
# personal entry for these hosts must not be read.
Host * ${final.lib.concatMapStringsSep " " (instance: "!${instance.host}") instances}
Include ~/.ssh/config
'';
# T3 only recognizes a Gitea on a custom domain through a matching tea
# login, and tea picks the login by the host of the git remote, so a token
# only reaches its own instance. The config lives in a private temp dir per
# call: tokens stay out of the nix store and a personal ~/.config/tea is left
# alone.
agentTea = final.writeShellApplication {
name = "tea";
text = ''
config="$(${final.coreutils}/bin/mktemp -d)"
trap '${final.coreutils}/bin/rm -rf "$config"' EXIT
${final.coreutils}/bin/mkdir "$config/tea"
default=true
${final.lib.concatMapStrings (instance: ''
if [ -r ${tokenFile instance} ]; then
if [ "$default" = true ]; then
printf 'logins:\n' >"$config/tea/config.yml"
fi
printf ' - name: %s\n url: %s\n token: %s\n user: %s\n default: %s\n' \
${instance.name} ${instance.url} "$(${final.coreutils}/bin/cat ${tokenFile instance})" \
${identity.name} "$default" >>"$config/tea/config.yml"
default=false
fi
'')
instances}
XDG_CONFIG_HOME="$config" ${final.tea}/bin/tea "$@"
'';
};
wrapperArgs = final.lib.concatStringsSep " " (final.lib.mapAttrsToList (name: value: "--set ${name} ${final.lib.escapeShellArg value}") {
GIT_AUTHOR_NAME = identity.name;
GIT_AUTHOR_EMAIL = identity.email;
GIT_COMMITTER_NAME = identity.name;
GIT_COMMITTER_EMAIL = identity.email;
JJ_USER = identity.name;
JJ_EMAIL = identity.email;
# bd otherwise falls back to the user's git user.name for its audit trail.
BEADS_ACTOR = identity.name;
GIT_SSH_COMMAND = "${final.openssh}/bin/ssh -F ${sshConfig}";
});
wrapT3 = package:
final.symlinkJoin {
inherit (package) name meta passthru;
paths = [package];
nativeBuildInputs = [final.makeWrapper];
postBuild = ''
for program in $out/bin/*; do
wrapProgram "$program" ${wrapperArgs} --prefix PATH : ${agentTea}/bin
done
'';
};
in {
llm-agents =
prev.llm-agents
// {
t3code = wrapT3 prev.llm-agents.t3code;
t3code-desktop = wrapT3 prev.llm-agents.t3code-desktop;
};
}
+89
View File
@@ -0,0 +1,89 @@
#!/usr/bin/env bash
# Checks for overlays.t3code-agent-identity with a stub t3 that runs its
# arguments inside the wrapper's environment.
# Usage: t3code-agent-identity.test.sh
set -euo pipefail
here="$(cd "$(dirname "$0")" && pwd)"
repo="$(cd "$here/.." && pwd)"
fail=0
contains() { # name, haystack, needle
if [[ "$2" == *"$3"* ]]; then echo "ok $1"; else echo "FAIL $1: missing '$3' in '$2'"; fail=1; fi
}
refute() { # name, haystack, needle
if [[ "$2" == *"$3"* ]]; then echo "FAIL $1: found '$3'"; fail=1; else echo "ok $1"; fi
}
work="$(mktemp -d)"
trap 'rm -rf "$work"' EXIT
secret="fake-token-$$-do-not-leak"
build() { # m3ta token file, az token file
nix build --no-link --print-out-paths --impure --expr "
let
flake = builtins.getFlake \"path:$repo\";
pkgs = import flake.inputs.nixpkgs {
system = \"x86_64-linux\";
overlays = [
(final: prev: {
llm-agents.t3code = final.writeShellScriptBin \"t3\" ''exec \"\$@\"'';
llm-agents.t3code-desktop = final.writeShellScriptBin \"t3-desktop\" ''exec \"\$@\"'';
})
(import $repo/overlays/t3code-agent-identity.nix {
tokenFiles = {m3ta = \"$1\"; az = \"$2\";};
})
];
};
in pkgs.llm-agents.t3code"
}
printf '%s' "$secret" >"$work/token"
both="$(build "$work/token" "$work/token")"
az_only="$(build "$work/missing" "$work/token")"
none="$(build "$work/missing" "$work/missing")"
export TMPDIR="$work/tmp"
mkdir "$TMPDIR"
t3() { "$1/bin/t3" "${@:2}"; }
out="$(t3 "$both" tea logins)"
contains "both: m3ta login" "$out" "https://code.m3ta.dev"
contains "both: az login" "$out" "https://git.az-gruppe.com"
refute "login list hides the token" "$out" "$secret"
out="$(t3 "$az_only" tea logins)"
contains "az only: az login" "$out" "https://git.az-gruppe.com"
refute "az only: no m3ta login" "$out" "code.m3ta.dev"
out="$(t3 "$az_only" tea logins default)"
contains "az only: az is default" "$out" "az"
t3 "$none" tea logins >/dev/null && echo "ok no token: tea still runs" || { echo "FAIL no token: tea failed"; fail=1; }
if [ -n "$(ls -A "$TMPDIR")" ]; then echo "FAIL temp config left behind"; fail=1; else echo "ok temp config removed"; fi
if grep -rqF "$secret" "$both/bin"/; then echo "FAIL token in the store"; fail=1; else echo "ok token not in the wrapper"; fi
sshcmd="$(t3 "$both" printenv GIT_SSH_COMMAND)"
g() { $sshcmd -G "$1"; }
out="$(g git.az-gruppe.com)"
contains "az: port" "$out" "port 2022"
contains "az: user" "$out" "user gitea"
contains "az: key" "$out" "identityfile ~/.ssh/m3ta-chiron"
known="$(echo "$out" | awk '/^userknownhostsfile/ {print $2}')"
contains "az: host key" "$(cat "$known")" "[git.az-gruppe.com]:2022 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIItSijmU5YwcJcoshtmYxpxBaVA4TPaCMk23ws7KDkAH"
out="$(g code.m3ta.dev)"
contains "m3ta: port" "$out" "port 22"
contains "m3ta: user" "$out" "user gitea"
contains "m3ta: key" "$out" "identityfile ~/.ssh/m3ta-chiron"
contains "m3ta: host key" "$(cat "$known")" "code.m3ta.dev ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFmmqZ4GgDEXJgj8uYrZAr/EoLIA6LJGkTIyKGQD/60a"
refute "other hosts keep their own key" "$(g example.org)" "m3ta-chiron"
contains "author" "$(t3 "$both" printenv GIT_AUTHOR_NAME)" "m3ta-chiron"
contains "committer" "$(t3 "$both" printenv GIT_COMMITTER_EMAIL)" "m3ta-chiron@agentmail.to"
contains "beads actor" "$(t3 "$both" printenv BEADS_ACTOR)" "m3ta-chiron"
exit "$fail"
+2 -1
View File
@@ -2,6 +2,7 @@
# Relies on coding.agents options provided by home/common/default.nix # Relies on coding.agents options provided by home/common/default.nix
# (m3taHomeInputs.m3ta-nixpkgs.homeManagerModules.default). # (m3taHomeInputs.m3ta-nixpkgs.homeManagerModules.default).
{ {
lib,
m3taHomeInputs, m3taHomeInputs,
pkgs, pkgs,
videoDrivers ? [], videoDrivers ? [],
@@ -13,7 +14,7 @@
enable = true; enable = true;
name = "m3ta-chiron"; name = "m3ta-chiron";
email = "m3ta-chiron@agentmail.to"; email = "m3ta-chiron@agentmail.to";
sshKey = "/home/m3tam3re/.ssh/gitea"; sshKey = lib.mkDefault "/home/m3tam3re/.ssh/gitea";
}; };
imports = [ imports = [