video1

hosts/m3-kratos/configuration.nix

@@ -0,0 +1,103 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+{pkgs, ...}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];
+
+  # Bootloader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.device = "/dev/vda";
+  boot.loader.grub.useOSProber = true;
+
+  networking.hostName = "m3-kratos"; # Define your hostname.
+  # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "de_DE.UTF-8";
+    LC_IDENTIFICATION = "de_DE.UTF-8";
+    LC_MEASUREMENT = "de_DE.UTF-8";
+    LC_MONETARY = "de_DE.UTF-8";
+    LC_NAME = "de_DE.UTF-8";
+    LC_NUMERIC = "de_DE.UTF-8";
+    LC_PAPER = "de_DE.UTF-8";
+    LC_TELEPHONE = "de_DE.UTF-8";
+    LC_TIME = "de_DE.UTF-8";
+  };
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.m3tam3re = {
+    isNormalUser = true;
+    description = "m3tam3re";
+    extraGroups = ["networkmanager" "wheel"];
+    packages = with pkgs; [];
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    #  wget
+    neovim
+    git
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh = {
+    enable = true;
+    settings.PermitRootLogin = "no";
+    allowSFTP = true;
+  };
+
+  programs.hyprland = {
+    enable = true;
+    xwayland.enable = true;
+  };
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "24.05"; # Did you read the comment?
+}

hosts/m3-kratos/default.nix

@@ -0,0 +1,37 @@
+# A staring point is the basic NIXOS configuration generated by the ISO installer.
+# On an existing NIXOS install you can use the following command in your flakes basedir:
+# sudo nixos-generate-config --dir ./hosts/m3tam3re
+#
+# Please make sure to change the first couple of lines in your configuration.nix:
+# { config, inputs, ouputs, lib, pkgs, ... }:
+#
+# {
+#   imports = [ # Include the results of the hardware scan.
+#     ./hardware-configuration.nix
+#     inputs.home-manager.nixosModules.home-manager
+#   ];
+#   ...
+#
+# Moreover please update the packages option in your user configuration and add the home-manager options:
+# users.users = {
+#   m3tam3re = {
+#     isNormalUser = true;
+#     initialPassword = "12345";
+#     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+#     packages = [ inputs.home-manager.packages.${pkgs.system}.default ];
+#   };
+# };
+#
+# home-manager = {
+#   useUserPackages = true;
+#   extraSpecialArgs = { inherit inputs outputs; };
+#   users.m3tam3re =
+#     import ../../home/m3tam3re/${config.networking.hostName}.nix;
+# };
+#
+# Please also change your hostname accordingly:
+#:w
+# networking.hostName = "nixos"; # Define your hostname.
+{
+  imports = [../common ./configuration.nix];
+}

hosts/m3-kratos/hardware-configuration.nix

@@ -0,0 +1,32 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "sr_mod" "virtio_blk" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/b3fbba01-1206-44d9-9b15-72e6313b4f72";
+      fsType = "ext4";
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp1s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}
+