Headscale and Tailscale config modules

nushell dir_fuzzy
+skim functions for nushell
2025-05-05 11:44:32 +02:00 · 2025-05-05 01:58:36 +02:00 · 2025-05-04 19:00:11 +02:00 · 2025-05-04 10:53:18 +02:00 · 2025-04-30 14:47:05 +02:00 · 2025-04-29 15:05:08 +02:00
134 changed files with 6177 additions and 7 deletions
@@ -1,7 +0,0 @@
-This repository is being used as a Dolt remote.
-
-ref=refs/dolt/data
-
-head=b30121458bb0b75b61e483e49b5084835b3777d8
-
-timestamp=2026-06-13T06:18:23Z
@@ -0,0 +1,437 @@
+{
+  "nodes": {
+    "agenix": {
+      "inputs": {
+        "darwin": "darwin",
+        "home-manager": "home-manager",
+        "nixpkgs": "nixpkgs",
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1745630506,
+        "narHash": "sha256-bHCFgGeu8XjWlVuaWzi3QONjDW3coZDqSHvnd4l7xus=",
+        "owner": "ryantm",
+        "repo": "agenix",
+        "rev": "96e078c646b711aee04b82ba01aefbff87004ded",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ryantm",
+        "repo": "agenix",
+        "type": "github"
+      }
+    },
+    "ags": {
+      "inputs": {
+        "astal": "astal",
+        "nixpkgs": [
+          "hyprpanel",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1736090999,
+        "narHash": "sha256-B5CJuHqfJrzPa7tObK0H9669/EClSHpa/P7B9EuvElU=",
+        "owner": "aylur",
+        "repo": "ags",
+        "rev": "5527c3c07d92c11e04e7fd99d58429493dba7e3c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "aylur",
+        "repo": "ags",
+        "type": "github"
+      }
+    },
+    "astal": {
+      "inputs": {
+        "nixpkgs": [
+          "hyprpanel",
+          "ags",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1735172721,
+        "narHash": "sha256-rtEAwGsHSppnkR3Qg3eRJ6Xh/F84IY9CrBBLzYabalY=",
+        "owner": "aylur",
+        "repo": "astal",
+        "rev": "6c84b64efc736e039a8a10774a4a1bf772c37aa2",
+        "type": "github"
+      },
+      "original": {
+        "owner": "aylur",
+        "repo": "astal",
+        "type": "github"
+      }
+    },
+    "darwin": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1744478979,
+        "narHash": "sha256-dyN+teG9G82G+m+PX/aSAagkC+vUv0SgUw3XkPhQodQ=",
+        "owner": "lnl7",
+        "repo": "nix-darwin",
+        "rev": "43975d782b418ebf4969e9ccba82466728c2851b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "lnl7",
+        "ref": "master",
+        "repo": "nix-darwin",
+        "type": "github"
+      }
+    },
+    "disko": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1745812220,
+        "narHash": "sha256-hotBG0EJ9VmAHJYF0yhWuTVZpENHvwcJ2SxvIPrXm+g=",
+        "owner": "nix-community",
+        "repo": "disko",
+        "rev": "d0c543d740fad42fe2c035b43c9d41127e073c78",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "disko",
+        "type": "github"
+      }
+    },
+    "dotfiles": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1728910889,
+        "narHash": "sha256-B/fb+7SKVxK9j851SgR4Nljd6EtE1DzqwLh6yOvkQOY=",
+        "ref": "refs/heads/master",
+        "rev": "360c75b2cbce800ebaf9445266e2fe345bf582bf",
+        "revCount": 53,
+        "type": "git",
+        "url": "https://code.m3tam3re.com/m3tam3re/dotfiles.git"
+      },
+      "original": {
+        "type": "git",
+        "url": "https://code.m3tam3re.com/m3tam3re/dotfiles.git"
+      }
+    },
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "agenix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1745494811,
+        "narHash": "sha256-YZCh2o9Ua1n9uCvrvi5pRxtuVNml8X2a03qIFfRKpFs=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "abfad3d2958c9e6300a883bd443512c55dfeb1be",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1745894335,
+        "narHash": "sha256-m47zhftaod/oHOwoVT25jstdcVLhkrVGyvEHKjbnFHI=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "1ad123239957d40e11ef66c203d0a7e272eb48aa",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "hyprlang": {
+      "inputs": {
+        "nixpkgs": [
+          "rose-pine-hyprcursor",
+          "nixpkgs"
+        ],
+        "systems": "systems_2"
+      },
+      "locked": {
+        "lastModified": 1709914708,
+        "narHash": "sha256-bR4o3mynoTa1Wi4ZTjbnsZ6iqVcPGriXp56bZh5UFTk=",
+        "owner": "hyprwm",
+        "repo": "hyprlang",
+        "rev": "a685493fdbeec01ca8ccdf1f3655c044a8ce2fe2",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hyprwm",
+        "repo": "hyprlang",
+        "type": "github"
+      }
+    },
+    "hyprpanel": {
+      "inputs": {
+        "ags": "ags",
+        "nixpkgs": "nixpkgs_2"
+      },
+      "locked": {
+        "lastModified": 1745885816,
+        "narHash": "sha256-yuIb6/gGcII+2YgtTLcYdga0pcL63B18xQ/oitOhg7k=",
+        "owner": "Jas-SinghFSU",
+        "repo": "HyprPanel",
+        "rev": "0c82ce9704c8063be8d8f60443071c91943eb68c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Jas-SinghFSU",
+        "repo": "HyprPanel",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1745391562,
+        "narHash": "sha256-sPwcCYuiEopaafePqlG826tBhctuJsLx/mhKKM5Fmjo=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "8a2f738d9d1f1d986b5a4cd2fd2061a7127237d7",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-2744d98": {
+      "locked": {
+        "lastModified": 1739661218,
+        "narHash": "sha256-hEGW0SKD0ORTEmoTuEEONxgENP5kMqe+NCtJug0U6R0=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "2744d988fa116fc6d46cdfa3d1c936d0abd7d121",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "2744d988fa116fc6d46cdfa3d1c936d0abd7d121",
+        "type": "github"
+      }
+    },
+    "nixpkgs-locked": {
+      "locked": {
+        "lastModified": 1739661218,
+        "narHash": "sha256-hEGW0SKD0ORTEmoTuEEONxgENP5kMqe+NCtJug0U6R0=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "2744d988fa116fc6d46cdfa3d1c936d0abd7d121",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "2744d988fa116fc6d46cdfa3d1c936d0abd7d121",
+        "type": "github"
+      }
+    },
+    "nixpkgs-master": {
+      "locked": {
+        "lastModified": 1745912738,
+        "narHash": "sha256-B7XJw9j3ZDB1RS3S43FtEZroGFbEApbI/UUSTK0WUjA=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "0dc8551522034a0686417149337304bde2c27e7b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "master",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-stable": {
+      "locked": {
+        "lastModified": 1745742390,
+        "narHash": "sha256-1rqa/XPSJqJg21BKWjzJZC7yU0l/YTVtjRi0RJmipus=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "26245db0cb552047418cfcef9a25da91b222d6c7",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-24.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1736344531,
+        "narHash": "sha256-8YVQ9ZbSfuUk2bUf2KRj60NRraLPKPS0Q4QFTbc+c2c=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "bffc22eb12172e6db3c5dde9e3e5628f8e3e7912",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_3": {
+      "locked": {
+        "lastModified": 1745794561,
+        "narHash": "sha256-T36rUZHUART00h3dW4sV5tv4MrXKT7aWjNfHiZz7OHg=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "5461b7fa65f3ca74cef60be837fd559a8918eaa0",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs_4": {
+      "locked": {
+        "lastModified": 1710272261,
+        "narHash": "sha256-g0bDwXFmTE7uGDOs9HcJsfLFhH7fOsASbAuOzDC+fhQ=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "0ad13a6833440b8e238947e47bea7f11071dc2b2",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "agenix": "agenix",
+        "disko": "disko",
+        "dotfiles": "dotfiles",
+        "home-manager": "home-manager_2",
+        "hyprpanel": "hyprpanel",
+        "nixpkgs": "nixpkgs_3",
+        "nixpkgs-2744d98": "nixpkgs-2744d98",
+        "nixpkgs-locked": "nixpkgs-locked",
+        "nixpkgs-master": "nixpkgs-master",
+        "nixpkgs-stable": "nixpkgs-stable",
+        "rose-pine-hyprcursor": "rose-pine-hyprcursor"
+      }
+    },
+    "rose-pine-hyprcursor": {
+      "inputs": {
+        "hyprlang": "hyprlang",
+        "nixpkgs": "nixpkgs_4",
+        "utils": "utils"
+      },
+      "locked": {
+        "lastModified": 1740132177,
+        "narHash": "sha256-gNc20APKMefFdH5RONBuHhOps14aiMdgIT0I6RaSN64=",
+        "owner": "ndom91",
+        "repo": "rose-pine-hyprcursor",
+        "rev": "568067f35a85932192bd43ddf64fc05eff850f9f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ndom91",
+        "repo": "rose-pine-hyprcursor",
+        "type": "github"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_2": {
+      "locked": {
+        "lastModified": 1689347949,
+        "narHash": "sha256-12tWmuL2zgBgZkdoB6qXZsgJEH9LR3oUgpaQq2RbI80=",
+        "owner": "nix-systems",
+        "repo": "default-linux",
+        "rev": "31732fcf5e8fea42e59c2488ad31a0e651500f68",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default-linux",
+        "type": "github"
+      }
+    },
+    "systems_3": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "utils": {
+      "inputs": {
+        "systems": "systems_3"
+      },
+      "locked": {
+        "lastModified": 1710146030,
+        "narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
@@ -0,0 +1,113 @@
+{
+  description = ''
+    For questions just DM me on X: https://twitter.com/@m3tam3re
+    There is also some NIXOS content on my YT channel: https://www.youtube.com/@m3tam3re
+
+    One of the best ways to learn NIXOS is to read other peoples configurations. I have personally learned a lot from Gabriel Fontes configs:
+    https://github.com/Misterio77/nix-starter-configs
+    https://github.com/Misterio77/nix-config
+
+    Please also check out the starter configs mentioned above.
+  '';
+
+  inputs = {
+    home-manager = {
+      url = "github:nix-community/home-manager";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
+    nixpkgs-stable.url = "github:nixos/nixpkgs/nixos-24.11";
+    nixpkgs-2744d98.url = "github:nixos/nixpkgs/2744d988fa116fc6d46cdfa3d1c936d0abd7d121";
+    nixpkgs-locked.url = "github:nixos/nixpkgs/2744d988fa116fc6d46cdfa3d1c936d0abd7d121";
+    nixpkgs-master.url = "github:nixos/nixpkgs/master";
+
+    agenix.url = "github:ryantm/agenix";
+
+    disko = {
+      url = "github:nix-community/disko";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+
+    hyprpanel.url = "github:Jas-SinghFSU/HyprPanel";
+    rose-pine-hyprcursor.url = "github:ndom91/rose-pine-hyprcursor";
+
+    dotfiles = {
+      url = "git+https://code.m3tam3re.com/m3tam3re/dotfiles.git";
+      flake = false;
+    };
+  };
+
+  outputs = {
+    self,
+    agenix,
+    dotfiles,
+    home-manager,
+    nixpkgs,
+    ...
+  } @ inputs: let
+    inherit (self) outputs;
+    systems = [
+      "aarch64-linux"
+      "i686-linux"
+      "x86_64-linux"
+      "aarch64-darwin"
+      "x86_64-darwin"
+    ];
+    forAllSystems = nixpkgs.lib.genAttrs systems;
+  in {
+    packages =
+      forAllSystems (system: import ./pkgs nixpkgs.legacyPackages.${system});
+    overlays = import ./overlays {inherit inputs outputs;};
+    homeManagerModules = import ./modules/home-manager;
+    nixosConfigurations = {
+      m3-ares = nixpkgs.lib.nixosSystem {
+        specialArgs = {
+          inherit inputs outputs;
+          hostname = "m3-ares";
+        };
+        modules = [
+          ./hosts/m3-ares
+          agenix.nixosModules.default
+        ];
+      };
+      m3-atlas = nixpkgs.lib.nixosSystem {
+        specialArgs = {inherit inputs outputs;};
+        system = "x86_64-linux";
+        modules = [
+          ./hosts/m3-atlas
+          inputs.disko.nixosModules.disko
+          agenix.nixosModules.default
+        ];
+      };
+      m3-kratos = nixpkgs.lib.nixosSystem {
+        specialArgs = {
+          inherit inputs outputs;
+          hostname = "m3-kratos";
+        };
+        modules = [
+          ./hosts/m3-kratos
+          agenix.nixosModules.default
+        ];
+      };
+      m3-helios = nixpkgs.lib.nixosSystem {
+        specialArgs = {inherit inputs outputs;};
+        system = "x86_64-linux";
+        modules = [
+          ./hosts/m3-helios
+          inputs.disko.nixosModules.disko
+          agenix.nixosModules.default
+        ];
+      };
+    };
+    homeConfigurations = {
+      "m3tam3re@m3-ares" = home-manager.lib.homeManagerConfiguration {
+        pkgs = nixpkgs.legacyPackages."x86_64-linux";
+        extraSpecialArgs = {
+          inherit inputs outputs;
+          hostname = "m3-ares";
+        };
+        modules = [./home/m3tam3re/m3tam3re-ares.nix];
+      };
+    };
+  };
+}
@@ -0,0 +1,48 @@
+{
+  lib,
+  outputs,
+  pkgs,
+  ...
+}: {
+  imports = [
+    (import
+      ../../modules/home-manager/zellij-ps.nix)
+  ]; #imports = builtins.attrValues outputs.homeManagerModules;
+  nixpkgs = {
+    # You can add overlays here
+    overlays = [
+      # Add overlays your own flake exports (from overlays and pkgs dir):
+      outputs.overlays.additions
+      outputs.overlays.modifications
+      outputs.overlays.stable-packages
+      outputs.overlays.locked-packages
+      outputs.overlays.pinned-packages
+      outputs.overlays.master-packages
+
+      # You can also add overlays exported from other flakes:
+      # neovim-nightly-overlay.overlays.default
+
+      # Or define it inline, for example:
+      # (final: prev: {
+      #   hi = final.hello.overrideAttrs (oldAttrs: {
+      #     patches = [ ./change-hello-to-hi.patch ];
+      #   });
+      # })
+    ];
+    # Configure your nixpkgs instance
+    config = {
+      # Disable if you don't want unfree packages
+      allowUnfree = true;
+      # Workaround for https://github.com/nix-community/home-manager/issues/2942
+      allowUnfreePredicate = _: true;
+    };
+  };
+
+  nix = {
+    package = lib.mkDefault pkgs.nix;
+    settings = {
+      experimental-features = ["nix-command" "flakes"];
+      warn-dirty = false;
+    };
+  };
+}
@@ -0,0 +1,99 @@
+{pkgs, ...}: {
+  imports = [
+    ./fish.nix
+    ./skim.nix
+    ./nitch.nix
+    ./nushell.nix
+    ./secrets.nix
+    ./starship.nix
+    ./zellij.nix
+  ];
+
+  programs.carapace = {
+    enable = true;
+    enableFishIntegration = true;
+    enableNushellIntegration = true;
+    enableBashIntegration = true;
+  };
+
+  programs.zoxide = {
+    enable = true;
+    enableFishIntegration = true;
+    enableNushellIntegration = true;
+  };
+
+  programs.neovim = {
+    enable = true;
+    defaultEditor = true;
+    viAlias = true;
+    vimAlias = true;
+    vimdiffAlias = true;
+    withNodeJs = true;
+    withPython3 = true;
+  };
+
+  programs.bat = {enable = true;};
+
+  programs.direnv = {
+    enable = true;
+    enableNushellIntegration = true;
+    nix-direnv.enable =
+      true;
+  };
+
+  programs.eza = {
+    enable = true;
+    enableFishIntegration = true;
+    enableBashIntegration = true;
+    extraOptions = ["-l" "--icons" "--git" "-a"];
+  };
+
+  programs.lf = {
+    enable = true;
+    settings = {
+      preview = true;
+      drawbox = true;
+      hidden = true;
+      icons = true;
+      theme = "Dracula";
+      previewer = "bat";
+    };
+  };
+
+  home.packages = with pkgs; [
+    agenix-cli
+    alejandra
+    bc
+    comma
+    coreutils
+    devenv
+    fd
+    gcc
+    go
+    htop
+    httpie
+    jq
+    just
+    lazygit
+    llm
+    lf
+    nix-index
+    nushellPlugins.skim
+    progress
+    ripgrep
+    rocmPackages.rocm-smi
+    rocmPackages.rocminfo
+    rocmPackages.rocm-runtime
+    tldr
+    pomodoro-timer
+    trash-cli
+    unimatrix
+    unzip
+    vulkan-tools
+    wttrbar
+    wireguard-tools
+    yazi
+    zellij-ps
+    zip
+  ];
+}
@@ -0,0 +1,77 @@
+{
+  config,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.fish;
+in {
+  options.features.cli.fish.enable = mkEnableOption "enable fish shell";
+
+  config = mkIf cfg.enable {
+    programs.fish = {
+      enable = true;
+      loginShellInit = ''
+        set -x NIX_PATH nixpkgs=channel:nixos-unstable
+        set -x NIX_LOG info
+        set -x WEBKIT_DISABLE_COMPOSITING_MODE 1
+        set -x TERMINAL kitty
+        set -x EDITOR nvim
+        set -x VISUAL zed
+        set -x XDG_DATA_HOME $HOME/.local/share
+        set -x FZF_CTRL_R_OPTS "
+        --preview='bat --color=always -n {}'
+        --preview-window up:3:hidden:wrap
+        --bind 'ctrl-/:toggle-preview'
+        --bind 'ctrl-y:execute-silent(echo -n {2..} | wl-copy)+abort'
+        --color header:bold
+        --header 'Press CTRL-Y to copy command into clipboard'"
+        set -x FZF_DEFAULT_COMMAND fd --type f --exclude .git --follow --hidden
+        set -x FZF_CTRL_T_COMMAND "$FZF_DEFAULT_COMMAND"
+        set -x FLAKE $HOME/p/nixos/nixos-config
+        source /run/agenix/${config.home.username}-secrets
+
+        if test (tty) = "/dev/tty1"
+          exec uwsm start -S -F /run/current-system/sw/bin/Hyprland
+        end
+        if test (tty) = "/dev/tty2"
+          exec gamescope -O HDMI-A-1 -W 1920 -H 1080 --adaptive-sync --hdr-enabled --rt --steam -- steam -pipewire-dmabuf -tenfoot
+        end
+      '';
+      shellAbbrs = {
+        ".." = "cd ..";
+        "..." = "cd ../..";
+        b = "yazi";
+        ls = "eza";
+        l = "eza -l --icons --git -a";
+        lt = "eza --tree --level=2 --long --icons --git";
+        grep = "rg";
+        ps = "procs";
+        just = "just --unstable";
+        fs = "du -ah . | sort -hr | head -n 10";
+
+        n = "nix";
+        nd = "nix develop -c $SHELL";
+        ns = "nix shell";
+        nsn = "nix shell nixpkgs#";
+        nb = "nix build";
+        nbn = "nix build nixpkgs#";
+        nf = "nix flake";
+
+        nr = "sudo nixos-rebuild --flake .";
+        nrs = "sudo nixos-rebuild switch --flake .#(uname -n)";
+        snr = "sudo nixos-rebuild --flake .";
+        snrs = "sudo nixos-rebuild --flake . switch";
+        hm = "home-manager --flake .";
+        hms = "home-manager --flake . switch";
+        hmr = "cd ~/projects/nix-configurations; nix flake lock --update-input dotfiles; home-manager --flake .#(whoami)@(hostname) switch";
+
+        tsu = "sudo tailscale up";
+        tsd = "sudo tailscale down";
+
+        vi = "nvim";
+        vim = "nvim";
+      };
+    };
+  };
+}
@@ -0,0 +1,15 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.nitch;
+in {
+  options.features.cli.nitch.enable = mkEnableOption "enable nitch";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [nitch];
+  };
+}
@@ -0,0 +1,154 @@
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.nushell;
+in {
+  options.features.cli.nushell.enable = mkEnableOption "enable nushell";
+
+  config = mkIf cfg.enable {
+    programs.nushell = {
+      enable = true;
+      plugins = with pkgs.nushellPlugins; [
+        skim
+      ];
+      envFile.text = ''
+        $env.config.show_banner = false
+        $env.NIX_PATH = "nixpkgs=channel:nixos-unstable"
+        $env.NIX_LOG = "iunfo"
+        $env.WEBKIT_DISABLE_COMPOSITING_MODE = "1"
+        $env.TERMINAL = "kitty"
+        $env.EDITOR = "nvim"
+        $env.VISUAL = "zed"
+        $env.XDG_DATA_HOME = $"($env.HOME)/.local/share"
+        $env.FZF_DEFAULT_COMMAND = "fd --type f --exclude .git --follow --hidden"
+        $env.FZF_DEFAULT_OPTS = "
+          --preview='bat --color=always -n {}'
+          --preview-window up:3:hidden:wrap
+          --bind 'ctrl-/:toggle-preview'
+          --bind 'ctrl-y:execute-silent(echo -n {2..} | wl-copy)+abort'
+          --color header:bold
+          --header 'Press CTRL-Y to copy command into clipboard'"
+        $env.FLAKE = $"($env.HOME)/p/nixos/nixos-config"
+      '';
+      configFile.text = ''
+        if (tty) == "/dev/tty1" {
+          exec uwsm start -S -F /run/current-system/sw/bin/Hyprland
+        }
+        if (tty) == "/dev/tty2" {
+          exec gamescope -O HDMI-A-1 -W 1920 -H 1080 --adaptive-sync --hdr-enabled --rt --steam -- steam -pipewire-dmabuf -tenfoot
+        }
+
+        alias .. = cd ..
+        alias ... = cd ...
+        alias h = cd $env.HOME
+        alias b = yazi
+        alias lt = eza --tree --level=2 --long --icons --git
+        alias grep = rg
+        alias just = just --unstable
+
+        alias n = nix
+        alias nd = nix develop -c $nu.current-shell
+        alias ns = nix shell
+        alias nsn = nix shell nixpkgs#
+        alias nb = nix build
+        alias nbn = nix build nixpkgs#
+        alias nf = nix flake
+
+        alias nr = sudo nixos-rebuild --flake .
+        alias nrs = sudo nixos-rebuild switch --flake .#(sys host | get hostname)
+        alias snr = sudo nixos-rebuild --flake .
+        alias snrs = sudo nixos-rebuild --flake . switch
+        alias hm = home-manager --flake .
+        alias hms = home-manager --flake . switch
+        alias hmr = do { cd ~/projects/nix-configurations; nix flake lock --update-input dotfiles; home-manager --flake .#(whoami)@(hostname) switch }
+
+        alias tsu = sudo tailscale up
+        alias tsd = sudo tailscale down
+
+        alias vi = nvim
+        alias vim = nvim
+
+        def history_fuzzy [] {
+            let selected = (
+                history
+                | uniq
+                | get command
+                | sk --height 40% --layout=reverse --color=fg:#f8f8f2,bg:#282a36,current_bg:#ff79c6,current_fg:#bd93f9,info:#ffb86c,marker:#6272a4,pointer:#50fa7b,spinner:#50fa7b
+            )
+            if ($selected | is-not-empty) {
+                ^nu -c ($selected)
+            } else {
+                null
+            }
+        }
+        def --env dir_fuzzy [] {
+            let selected = (
+                fd --type directory
+                | ^sk --preview 'eza --tree --no-permissions --no-filesize --no-user --no-time --only-dirs {}' --height 40% --layout=reverse --color=fg:#f8f8f2,bg:#282a36,current_bg:#ff79c6,current_fg:#bd93f9,info:#ffb86c,marker:#6272a4,pointer:#50fa7b,spinner:#50fa7b
+            )
+            cd $selected
+        }
+        def find_fuzzy [] {
+            # Find non-hidden text files with matches for any content and select one via fuzzy search
+            let selected = (
+                ^fd --type file --no-hidden -X rg -l --files-with-matches .
+                | lines
+                | sk --format { $in }
+                    --height 40%
+                    --layout=reverse
+                    --preview { open $in | bat --color=always --line-range :50 }
+                    --color=fg:#f8f8f2,bg:#282a36,current_bg:#ff79c6,current_fg:#bd93f9,info:#ffb86c,marker:#6272a4,pointer:#50fa7b,spinner:##50fa7b
+            )
+            if ($selected | is-not-empty) {
+                ^$env.EDITOR $selected
+            }
+        }
+
+        $env.config = {
+          keybindings: [
+            {
+              name: history_fuzzy
+              modifier: control
+              keycode: char_r
+              mode: [emacs, vi_insert, vi_normal]
+              event: [
+                {
+                  send: executehostcommand
+                  cmd: "history_fuzzy"
+                }
+              ]
+            }
+            {
+              name: dir_fuzzy
+              modifier: alt
+              keycode: char_c
+              mode: [emacs, vi_insert, vi_normal]
+              event: [
+                {
+                  send: executehostcommand
+                  cmd: "dir_fuzzy"
+                }
+              ]
+            }
+            {
+              name: history_fuzzy
+              modifier: control
+              keycode: char_t
+              mode: [emacs, vi_insert, vi_normal]
+              event: [
+                {
+                  send: executehostcommand
+                  cmd: "find_fuzzy"
+                }
+              ]
+            }
+          ]
+        }
+      '';
+    };
+  };
+}
@@ -0,0 +1,21 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.secrets;
+in {
+  options.features.cli.secrets.enable = mkEnableOption "enable secrets";
+
+  config = mkIf cfg.enable {
+    programs.password-store = {
+      enable = true;
+      package =
+        pkgs.pass-wayland.withExtensions
+        (exts: [exts.pass-otp exts.pass-import]);
+    };
+    home.packages = with pkgs; [pinentry];
+  };
+}
@@ -0,0 +1,23 @@
+{
+  config,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.skim;
+in {
+  options.features.cli.skim.enable = mkEnableOption "enable skim fuzzy finder";
+
+  config = mkIf cfg.enable {
+    programs.skim = {
+      enable = true;
+      enableFishIntegration = true;
+      defaultOptions = [
+        "--preview='bat --color=always -n {}'"
+        "--bind 'ctrl-/:toggle-preview'"
+      ];
+      defaultCommand = "fd --type f --exclude .git --follow --hidden";
+      changeDirWidgetCommand = "fd --type d --exclude .git --follow --hidden";
+    };
+  };
+}
@@ -0,0 +1,18 @@
+{
+  config,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.starship;
+in {
+  options.features.cli.starship.enable = mkEnableOption "enable starship prompt";
+
+  config = mkIf cfg.enable {
+    programs.starship = {
+      enable = true;
+      enableFishIntegration = true;
+      enableNushellIntegration = true;
+    };
+  };
+}
@@ -0,0 +1,16 @@
+{
+  config,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.cli.zellij;
+in {
+  options.features.cli.zellij.enable = mkEnableOption "enable tmux";
+
+  config = mkIf cfg.enable {
+    programs.zellij = {
+      enable = true;
+    };
+  };
+}
@@ -0,0 +1,21 @@
+{pkgs, ...}: {
+  home.packages = with pkgs; [
+    devpod
+    devpod-desktop
+    code2prompt
+    (python3.withPackages (ps:
+      with ps; [
+        pip
+        # Scientific packages
+        numba
+        numpy
+        openai-whisper
+        torch
+        srt
+      ]))
+    nixd
+    alejandra
+    tailwindcss
+    tailwindcss-language-server
+  ];
+}
@@ -0,0 +1,105 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.office;
+in {
+  options.features.desktop.coding.enable =
+    mkEnableOption "install coding related stuff";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [
+      bruno
+      insomnia
+    ];
+
+    programs.zed-editor = {
+      enable = true;
+      userSettings = {
+        features = {
+          inline_prediction_provider = "zed";
+          edit_prediction_provider = "zed";
+          copilot = false;
+        };
+        telemetry = {
+          metrics = false;
+        };
+        lsp = {
+          rust_analyzer = {
+            binary = {path_lookup = true;};
+          };
+        };
+        languages = {
+          Nix = {
+            language_servers = ["nixd"];
+            formatter = {
+              external = {
+                command = "alejandra";
+                arguments = ["-q" "-"];
+              };
+            };
+          };
+          Python = {
+            language_servers = ["pyright"];
+            formatter = {
+              external = {
+                command = "black";
+                arguments = ["-"];
+              };
+            };
+          };
+        };
+        assistant = {
+          version = "2";
+          default_model = {
+            provider = "zed.dev";
+            model = "claude-3-5-sonnet-latest";
+          };
+        };
+        language_models = {
+          anthropic = {
+            version = "1";
+            api_url = "https://api.anthropic.com";
+          };
+          openai = {
+            version = "1";
+            api_url = "https://api.openai.com/v1";
+          };
+          ollama = {
+            api_url = "http://localhost:11434";
+          };
+        };
+        ssh_connections = [
+          {
+            host = "152.53.85.162";
+            nickname = "m3-atlas";
+            args = ["-i" "~/.ssh/m3tam3re"];
+          }
+          {
+            host = "95.217.189.186";
+            port = 2222;
+            nickname = "self-host-playbook";
+            args = ["-i" "~/.ssh/self-host-playbook"];
+            "projects" = [
+              {
+                paths = ["/etc/nixos/current-systemconfig"];
+              }
+            ];
+          }
+        ];
+        auto_update = false;
+        format_on_save = "on";
+        vim_mode = true;
+        load_direnv = "shell_hook";
+        theme = "Dracula";
+        buffer_font_family = "FiraCode Nerd Font";
+        ui_font_size = 16;
+        buffer_font_size = 16;
+        show_edit_predictions = true;
+      };
+    };
+  };
+}
@@ -0,0 +1,15 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.crypto;
+in {
+  options.features.desktop.crypto.enable = mkEnableOption "Enable Crypto";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [bisq2 monero-gui trezor-suite];
+  };
+}
@@ -0,0 +1,135 @@
+{pkgs, ...}: {
+  imports = [
+    ./coding.nix
+    ./crypto.nix
+    ./fonts.nix
+    ./gaming.nix
+    ./hyprland.nix
+    ./media.nix
+    ./office.nix
+    ./rofi.nix
+    ./theme.nix
+    ./wayland.nix
+    ./wofi.nix
+  ];
+
+  xdg = {
+    enable = true;
+    configFile."mimeapps.list".force = true;
+    mimeApps = {
+      enable = true;
+      associations.added = {
+        "application/zip" = ["org.gnome.FileRoller.desktop"];
+        "application/csv" = ["calc.desktop"];
+        "application/pdf" = ["okularApplication_pdf.desktop"];
+      };
+      defaultApplications = {
+        "application/zip" = ["org.gnome.FileRoller.desktop"];
+        "application/csv" = ["calc.desktop"];
+        "application/pdf" = ["okularApplication_pdf.desktop"];
+        "application/md" = ["nvim.desktop"];
+        "application/text" = ["nvim.desktop"];
+        "x-scheme-handler/http" = ["io.github.zen_browser.zen"];
+        "x-scheme-handler/https" = ["io.github.zen_browser.zen"];
+      };
+    };
+    userDirs = {
+      enable = true;
+      createDirectories = true;
+    };
+  };
+
+  home.sessionVariables = {
+    WEBKIT_DISABLE_COMPOSITING_MODE = "1";
+    NIXOS_OZONE_WL = "1";
+    TERMINAL = "kitty";
+    QT_QPA_PLATFORM = "wayland";
+    XDG_CURRENT_DESKTOP = "Hyprland";
+    XDG_SESSION_TYPE = "wayland";
+    XDG_SESSION_DESKTOP = "Hyprland";
+  };
+  home.sessionPath = ["\${XDG_BIN_HOME}" "\${HOME}/.cargo/bin" "$HOME/.npm-global/bin"];
+
+  fonts.fontconfig.enable = true;
+
+  services.mako = {
+    enable = true;
+    backgroundColor = "#282a36";
+    textColor = "#80FFEA";
+    borderColor = "#9742b5";
+    width = 400;
+    height = 150;
+    padding = "10,20";
+    borderRadius = 8;
+    borderSize = 1;
+    margin = "20,20";
+  };
+
+  programs.kitty = {
+    enable = true;
+    shellIntegration = {
+      enableFishIntegration = true;
+      enableBashIntegration = true;
+    };
+    font = {name = "Fira Code";};
+    themeFile = "Dracula";
+    settings = {copy_on_select = "yes";};
+  };
+
+  home.pointerCursor = {
+    gtk.enable = true;
+    package = pkgs.bibata-cursors;
+    name = "Bibata-Modern-Ice";
+    size = 20;
+  };
+
+  home.packages = with pkgs; [
+    appimage-run
+    anytype
+    # blueberry
+    brave
+    # brightnessctl
+    # clipman
+    distrobox
+    # eww
+    # firefox-devedition
+    file-roller
+    hyprpanel
+    seahorse
+    sushi
+    # glib
+    # google-chrome
+    # gsettings-desktop-schemas
+    # graphviz
+    # ksnip
+    msty
+    msty-sidecar
+    nwg-look
+    # pamixer
+    # pavucontrol
+    # libsForQt5.qtstyleplugins
+    # stable.nyxt
+    # pcmanfm
+    rose-pine-hyprcursor
+    # qt5ct
+    # qt6.qtwayland
+    #rustdesk
+    # socat
+    # unrar
+    # unzip
+    # usbutils
+    # v4l-utils
+    remmina
+    slack
+    telegram-desktop
+    vivaldi
+    vivaldi-ffmpeg-codecs
+    warp-terminal
+    # wl-clipboard
+    # wlogout
+    # wtype
+    # xdg-utils
+    # ydotool
+    # zip
+  ];
+}
@@ -0,0 +1,24 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.fonts;
+in {
+  options.features.desktop.fonts.enable =
+    mkEnableOption "install additional fonts for desktop apps";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [
+      fira-code
+      fira-code-symbols
+      nerd-fonts.fira-code
+      nerd-fonts.jetbrains-mono
+      font-manager
+      font-awesome_5
+      noto-fonts
+    ];
+  };
+}
@@ -0,0 +1,21 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.gaming;
+in {
+  options.features.desktop.gaming.enable =
+    mkEnableOption "install gaming related stuff";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [
+      gamescope
+      goverlay
+      mangohud
+      protonup-ng
+    ];
+  };
+}
@@ -0,0 +1,186 @@
+{
+  wayland.windowManager.hyprland = {
+    settings = {
+      xwayland = {
+        force_zero_scaling = true;
+      };
+
+      exec-once = [
+        "hyprpanel"
+        "hyprpaper"
+        "hypridle"
+        "wl-paste --type text --watch cliphist store" # Stores only text data
+        "wl-paste --type image --watch cliphist store" # Stores only image data "wl-paste -p -t text --watch clipman store -P --histpath=\"~/.local/share/clipman-primary.json\""
+      ];
+
+      env = [
+        "XCURSOR_SIZE,32"
+        "HYPRCURSOR_THEME,Bibata-Modern-Ice"
+        "WLR_NO_HARDWARE_CURSORS,1"
+        "GTK_THEME,Dracula"
+      ];
+
+      input = {
+        kb_layout = "de,us";
+        kb_variant = "";
+        kb_model = "";
+        kb_rules = "";
+        kb_options = "ctrl:nocaps";
+        follow_mouse = 1;
+      };
+
+      general = {
+        gaps_in = 5;
+        gaps_out = 5;
+        border_size = 1;
+        "col.active_border" = "rgba(9742b5ee) rgba(9742b5ee) 45deg";
+        "col.inactive_border" = "rgba(595959aa)";
+        layout = "dwindle";
+      };
+
+      decoration = {
+        shadow = {
+          enabled = true;
+          range = 60;
+          render_power = 3;
+          color = "rgba(1E202966)";
+          offset = "1 2";
+          scale = 0.97;
+        };
+        rounding = 8;
+        blur = {
+          enabled = true;
+          size = 3;
+          passes = 3;
+        };
+        active_opacity = 0.9;
+        inactive_opacity = 0.5;
+      };
+
+      animations = {
+        enabled = true;
+        bezier = "myBezier, 0.05, 0.9, 0.1, 1.05";
+        animation = [
+          "windows, 1, 7, myBezier"
+          "windowsOut, 1, 7, default, popin 80%"
+          "border, 1, 10, default"
+          "borderangle, 1, 8, default"
+          "fade, 1, 7, default"
+          "workspaces, 1, 6, default"
+        ];
+      };
+
+      dwindle = {
+        pseudotile = true;
+        preserve_split = true;
+      };
+
+      master = {
+        new_status = "master";
+      };
+
+      gestures = {
+        workspace_swipe = false;
+      };
+
+      device = [
+        {
+          name = "epic-mouse-v1";
+          sensitivity = -0.5;
+        }
+        {
+          name = "zsa-technology-labs-moonlander-mark-i";
+          kb_layout = "us";
+        }
+        {
+          name = "keychron-keychron-k7";
+          kb_layout = "us";
+        }
+      ];
+      windowrule = [
+        "float, class:file_progress"
+        "float, class:confirm"
+        "float, class:dialog"
+        "float, class:download"
+        "float, class:notification"
+        "float, class:error"
+        "float, class:splash"
+        "float, class:confirmreset"
+        "float, title:Open File"
+        "float, title:branchdialog"
+        "float, class:pavucontrol-qt"
+        "float, class:pavucontrol"
+        "fullscreen, class:wlogout"
+        "float, title:wlogout"
+        "fullscreen, title:wlogout"
+        "float, class:mpv"
+        "idleinhibit focus, class:mpv"
+        "opacity 1.0 override, class:mpv"
+        "float, title:^(Media viewer)$"
+        "float, title:^(Volume Control)$"
+        "float, title:^(Picture-in-Picture)$"
+        "float,title:^(floating-pomodoro)$"
+        "size 250 50, title:^(floating-pomodoro)$"
+        "move 12 100%-150,title:^(floating-pomodoro)$"
+        "pin,title:^(floating-pomodoro)$"
+      ];
+
+      "$mainMod" = "SUPER";
+
+      bind = [
+        "$mainMod, return, exec, nu -c zellij-ps"
+        # "$mainMod, t, exec, warp-terminal"
+        "$mainMod, t, exec, kitty -e nu -c 'nitch; exec nu'"
+        "$mainMod SHIFT, t, exec, launch-timer"
+        "$mainMod SHIFT, e, exec, kitty -e zellij_nvim"
+        "$mainMod, o, exec, hyprctl setprop activewindow opaque toggle"
+        "$mainMod, b, exec, thunar"
+        "$mainMod SHIFT, B, exec, vivaldi"
+        "$mainMod, Escape, exec, wlogout -p layer-shell"
+        "$mainMod, Space, togglefloating"
+        "$mainMod, q, killactive"
+        "$mainMod, M, exit"
+        "$mainMod, F, fullscreen"
+        "$mainMod SHIFT, V, togglefloating"
+        "$mainMod, D, exec, rofi -show"
+        "$mainMod, V, exec, cliphist list | rofi -dmenu | cliphist decode | wl-copy"
+        "$mainMod SHIFT, S, exec, bemoji"
+        "$mainMod, P, exec, rofi-pass"
+        "$mainMod SHIFT, P, pseudo"
+        "$mainMod, J, togglesplit"
+        "$mainMod, h, movefocus, l"
+        "$mainMod, l, movefocus, r"
+        "$mainMod, k, movefocus, u"
+        "$mainMod, j, movefocus, d"
+        "$mainMod, 1, workspace, 1"
+
+        "$mainMod, 2, workspace, 2"
+        "$mainMod, 3, workspace, 3"
+        "$mainMod, 4, workspace, 4"
+        "$mainMod, 5, workspace, 5"
+        "$mainMod, 6, workspace, 6"
+        "$mainMod, 7, workspace, 7"
+        "$mainMod, 8, workspace, 8"
+        "$mainMod, 9, workspace, 9"
+        "$mainMod, 0, workspace, 10"
+        "$mainMod SHIFT, 1, movetoworkspace, 1"
+        "$mainMod SHIFT, 2, movetoworkspace, 2"
+        "$mainMod SHIFT, 3, movetoworkspace, 3"
+        "$mainMod SHIFT, 4, movetoworkspace, 4"
+        "$mainMod SHIFT, 5, movetoworkspace, 5"
+        "$mainMod SHIFT, 6, movetoworkspace, 6"
+        "$mainMod SHIFT, 7, movetoworkspace, 7"
+        "$mainMod SHIFT, 8, movetoworkspace, 8"
+        "$mainMod SHIFT, 9, movetoworkspace, 9"
+        "$mainMod SHIFT, 0, movetoworkspace, 10"
+        "$mainMod, mouse_down, workspace, e+1"
+        "$mainMod, mouse_up, workspace, e-1"
+      ];
+
+      bindm = [
+        "$mainMod, mouse:272, movewindow"
+        "$mainMod, mouse:273, resizewindow"
+      ];
+    };
+  };
+}
@@ -0,0 +1,57 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.media;
+in {
+  options.features.desktop.media.enable =
+    mkEnableOption "enable media features";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [
+      # handbrake
+      # kdePackages.kdenlive
+      # makemkv
+      # mediainfo
+      amf
+      blueberry
+      ffmpeg_6-full
+      gst_all_1.gstreamer
+      gst_all_1.gst-vaapi
+      handbrake
+      inkscape
+      kdePackages.kdenlive
+      krita
+      libation
+      #makemkv
+      pamixer
+      pavucontrol
+      qpwgraph
+      v4l-utils
+      plexamp
+      webcord
+      # uxplay
+      # vlc
+      # webcord
+      # yt-dlp
+      unimatrix
+    ];
+
+    programs = {
+      mpv = {
+        enable = true;
+        bindings = {
+          WHEEL_UP = "seek 10";
+          WHEEL_DOWN = "seek -10";
+        };
+        config = {
+          profile = "gpu-hq";
+          ytdl-format = "bestvideo+bestaudio";
+        };
+      };
+    };
+  };
+}
@@ -0,0 +1,18 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.office;
+in {
+  options.features.desktop.office.enable =
+    mkEnableOption "install office and paperwork stuff";
+
+  config = mkIf cfg.enable {
+    home.packages = with pkgs; [
+      libreoffice-fresh
+    ];
+  };
+}
@@ -0,0 +1,38 @@
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.rofi;
+in {
+  options.features.desktop.rofi.enable = mkEnableOption "enable rofi";
+
+  config = mkIf cfg.enable {
+    programs.rofi = with pkgs; {
+      enable = true;
+      package = rofi.override {
+        plugins = [
+          rofi-calc
+          rofi-emoji
+          stable.rofi-file-browser
+        ];
+      };
+      pass = {
+        enable = true;
+        package = rofi-pass-wayland;
+      };
+      terminal = "\${pkgs.kitty}/bin/kitty";
+      font = "Fira Code";
+      extraConfig = {
+        show-icons = true;
+        disable-history = false;
+        modi = "drun,calc,emoji,filebrowser";
+        kb-primary-paste = "Control+V,Shift+Insert";
+        kb-secondary-paste = "Control+v,Insert";
+      };
+      theme = "dracula";
+    };
+  };
+}
@@ -0,0 +1,17 @@
+{pkgs, ...}: {
+  qt = {
+    enable = true;
+    platformTheme.name = "gtk";
+  };
+  gtk = {
+    enable = true;
+    theme = {
+      name = "Dracula";
+      package = pkgs.dracula-theme;
+    };
+    iconTheme = {
+      name = "Dracula";
+      package = pkgs.dracula-icon-theme;
+    };
+  };
+}
@@ -0,0 +1,285 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.wayland;
+in {
+  options.features.desktop.wayland.enable = mkEnableOption "wayland extra tools and config";
+
+  config = mkIf cfg.enable {
+    programs.waybar = {
+      enable = true;
+      style = ''
+        @define-color background-darker rgba(30, 31, 41, 230);
+        @define-color background #282a36;
+        @define-color selection #44475a;
+        @define-color foreground #f8f8f2;
+        @define-color comment #6272a4;
+        @define-color cyan #8be9fd;
+        @define-color green #50fa7b;
+        @define-color orange #ffb86c;
+        @define-color pink #ff79c6;
+        @define-color purple #bd93f9;
+        @define-color red #ff5555;
+        @define-color yellow #f1fa8c;
+
+        * {
+            border: none;
+            border-radius: 0;
+            font-family: FiraCode Nerd Font;
+            font-weight: bold;
+            font-size: 14px;
+            min-height: 0;
+        }
+
+        window#waybar {
+            background: rgba(21, 18, 27, 0);
+            color: #cdd6f4;
+        }
+
+        tooltip {
+            background: #1e1e2e;
+            border-radius: 10px;
+            border-width: 2px;
+            border-style: solid;
+            border-color: #11111b;
+        }
+
+        #workspaces button {
+            padding: 5px;
+            color: #313244;
+            margin-right: 5px;
+        }
+
+        #workspaces button.active {
+            color: #11111b;
+            background: #a6e3a1;
+            border-radius: 10px;
+        }
+
+        #workspaces button.focused {
+            color: #a6adc8;
+            background: #eba0ac;
+            border-radius: 10px;
+        }
+
+        #workspaces button.urgent {
+            color: #11111b;
+            background: #a6e3a1;
+            border-radius: 10px;
+        }
+
+        #workspaces button:hover {
+            background: #11111b;
+            color: #cdd6f4;
+            border-radius: 10px;
+        }
+
+        #custom-language,
+        #custom-updates,
+        #custom-caffeine,
+        #custom-weather,
+        #window,
+        #clock,
+        #battery,
+        #pulseaudio,
+        #network,
+        #workspaces,
+        #tray,
+        #backlight {
+            background: #1e1e2e;
+            padding: 0px 10px;
+            margin: 3px 0px;
+            margin-top: 10px;
+            border: 1px solid #181825;
+        }
+
+        #tray {
+            border-radius: 10px;
+            margin-right: 10px;
+        }
+
+        #workspaces {
+            background: #1e1e2e;
+            border-radius: 10px;
+            margin-left: 10px;
+            padding-right: 0px;
+            padding-left: 5px;
+        }
+
+        #custom-caffeine {
+            color: #89dceb;
+            border-radius: 10px 0px 0px 10px;
+            border-right: 0px;
+            margin-left: 10px;
+        }
+
+        #custom-language {
+            color: #f38ba8;
+            border-left: 0px;
+            border-right: 0px;
+        }
+
+        #custom-updates {
+            color: #f5c2e7;
+            border-left: 0px;
+            border-right: 0px;
+        }
+
+        #window {
+            border-radius: 10px;
+            margin-left: 60px;
+            margin-right: 60px;
+        }
+
+        #clock {
+            color: #fab387;
+            border-radius: 10px 0px 0px 10px;
+            margin-left: 0px;
+            border-right: 0px;
+        }
+
+        #network {
+            color: #f9e2af;
+            border-left: 0px;
+            border-right: 0px;
+        }
+
+        #pulseaudio {
+            color: #89b4fa;
+            border-left: 0px;
+            border-right: 0px;
+        }
+
+        #pulseaudio.microphone {
+            color: #cba6f7;
+            border-left: 0px;
+            border-right: 0px;
+        }
+
+        #battery {
+            color: #a6e3a1;
+            border-radius: 0 10px 10px 0;
+            margin-right: 10px;
+            border-left: 0px;
+        }
+
+        #custom-weather {
+            border-radius: 0px 10px 10px 0px;
+            border-right: 0px;
+            margin-left: 0px;
+        }
+      '';
+      settings = {
+        mainbar = {
+          layer = "top";
+          position = "top";
+          mod = "dock";
+          exclusive = true;
+          passthrough = false;
+          gtk-layer-shell = true;
+          height = 0;
+          modules-left = ["clock" "custom/weather" "hyprland/workspaces"];
+          modules-center = ["hyprland/window"];
+          modules-right = [
+            "tray"
+            "custom/language"
+            "battery"
+            "backlight"
+            "pulseaudio"
+            "pulseaudio#microphone"
+          ];
+
+          "hyprland/window" = {
+            format = "👉 {}";
+            seperate-outputs = true;
+          };
+          "hyprland/workspaces" = {
+            disable-scroll = true;
+            all-outputs = true;
+            on-click = "activate";
+            format = " {name} {icon} ";
+            on-scroll-up = "hyprctl dispatch workspace e+1";
+            on-scroll-down = "hyprctl dispatch workspace e-1";
+            format-icons = {
+              "1" = "";
+              "2" = "";
+              "3" = "";
+              "4" = "";
+              "5" = "";
+              "6" = "";
+              "7" = "";
+            };
+            persistent_workspaces = {
+              "1" = [];
+              "2" = [];
+              "3" = [];
+              "4" = [];
+            };
+          };
+          "custom/weather" = {
+            format = "{}°C";
+            tooltip = true;
+            interval = 3600;
+            exec = "wttrbar --location Pockau-Lengefeld";
+            return-type = "json";
+          };
+          tray = {
+            icon-size = 13;
+            spacing = 10;
+          };
+          clock = {
+            format = " {:%R   %d/%m}";
+            tooltip-format = "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>";
+          };
+          pulseaudio = {
+            format = "{icon} {volume}%";
+            tooltip = false;
+            format-muted = " Muted";
+            on-click = "pamixer -t";
+            on-scroll-up = "pamixer -i 5";
+            on-scroll-down = "pamixer -d 5";
+            scroll-step = 5;
+            format-icons = {
+              headphone = "";
+              hands-free = "";
+              headset = "";
+              phone = "";
+              portable = "";
+              car = "";
+              default = ["" "" ""];
+            };
+          };
+          "pulseaudio#microphone" = {
+            format = "{format_source}";
+            format-source = " {volume}%";
+            format-source-muted = " Muted";
+            on-click = "pamixer --default-source -t";
+            on-scroll-up = "pamixer --default-source -i 5";
+            on-scroll-down = "pamixer --default-source -d 5";
+            scroll-step = 5;
+          };
+        };
+      };
+    };
+
+    home.packages = with pkgs; [
+      grim
+      hyprcursor
+      hyprlock
+      hyprpaper
+      qt6.qtwayland
+      slurp
+      waypipe
+      pinned.wl-clipboard
+      wf-recorder
+      wl-mirror
+      wlogout
+      wtype
+      ydotool
+    ];
+  };
+}
@@ -0,0 +1,6 @@
+{pkgs, ...}: {
+  home.packages = with pkgs; [
+    wofi
+    bemoji
+  ];
+}
@@ -0,0 +1,26 @@
+{
+  pkgs,
+  inputs,
+  ...
+}: {
+  home.file.".config/bat" = {
+    source = "${inputs.dotfiles}/bat";
+    recursive = true;
+  };
+  home.file.".config/nyxt" = {
+    source = "${inputs.dotfiles}/nyxt";
+    recursive = true;
+  };
+  # home.file.".config/hypr" = {
+  #   source = "${inputs.dotfiles}/hypr";
+  #   recursive = true;
+  # };
+  home.file.".config/nvim" = {
+    source = "${inputs.dotfiles}/nvim";
+    recursive = true;
+  };
+  home.file.".config/zellij" = {
+    source = "${inputs.dotfiles}/zellij";
+    recursive = true;
+  };
+}
@@ -0,0 +1,115 @@
+# This is a default home.nix generated by the follwing hone-manager command
+#
+# home-manager init ./
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}: {
+  # Home Manager needs a bit of information about you and the paths it should
+  # manage.
+  home.username = lib.mkDefault "your-name";
+  home.homeDirectory = lib.mkDefault "/home/${config.home.username}";
+
+  # This value determines the Home Manager release that your configuration is
+  # compatible with. This helps avoid breakage when a new Home Manager release
+  # introduces backwards incompatible changes.
+  #
+  # You should not change this value, even if you update Home Manager. If you do
+  # want to update the value, then make sure to first check the Home Manager
+  # release notes.
+  home.stateVersion = "24.11"; # Please read the comment before changing.
+
+  # The home.packages option allows you to install Nix packages into your
+  # environment.
+  home.packages = with pkgs; [
+    # # Adds the 'hello' command to your environment. It prints a friendly
+    # # "Hello, world!" when run.
+    # pkgs.hello
+
+    # # It is sometimes useful to fine-tune packages, for example, by applying
+    # # overrides. You can do that directly here, just don't forget the
+    # # parentheses. Maybe you want to install Nerd Fonts with a limited number of
+    # # fonts?
+    # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; })
+
+    # # You can also create simple shell scripts directly inside your
+    # # configuration. For example, this adds a command 'my-hello' to your
+    # # environment:
+    # (pkgs.writeShellScriptBin "my-hello" ''
+    #   echo "Hello, ${config.home.username}!"
+    # '')
+  ];
+
+  # Home Manager is pretty good at managing dotfiles. The primary way to manage
+  # plain files is through 'home.file'.
+  home.file = {
+    # # Building this configuration will create a copy of 'dotfiles/screenrc' in
+    # # the Nix store. Activating the configuration will then make '~/.screenrc' a
+    # # symlink to the Nix store copy.
+    # ".screenrc".source = dotfiles/screenrc;
+
+    # # You can also set the file content immediately.
+    # ".gradle/gradle.properties".text = ''
+    #   org.gradle.console=verbose
+    #   org.gradle.daemon.idletimeout=3600000
+    # '';
+  };
+
+  # Home Manager can also manage your environment variables through
+  # 'home.sessionVariables'. If you don't want to manage your shell through Home
+  # Manager then you have to manually source 'hm-session-vars.sh' located at
+  # either
+  #
+  #  ~/.nix-profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  /etc/profiles/per-user/m3tam3re/etc/profile.d/hm-session-vars.sh
+  #
+  home.sessionVariables = {
+    # EDITOR = "emacs";
+  };
+
+  # Let Home Manager install and manage itself.
+  programs.home-manager.enable = true;
+
+  programs.git = {
+    enable = true;
+    userName = "m3tam3re";
+    userEmail = "m@m3tam3re.com";
+    aliases = {st = "status";};
+    extraConfig = {
+      core.excludesfile = "~/.gitignore_global";
+      init.defaultBranch = "master";
+    };
+  };
+  programs.zellij-ps = {
+    enable = true;
+    projectFolders = [
+      "${config.home.homeDirectory}/p/c"
+      "${config.home.homeDirectory}/p"
+      "${config.home.homeDirectory}/.config"
+    ];
+    layout = ''
+      layout {
+          pane size=1 borderless=true {
+              plugin location="zellij:tab-bar"
+          }
+          pane size="70%" command="nvim"
+          pane split_direction="vertical" {
+              pane
+              pane command="unimatrix"
+          }
+          pane size=1 borderless=true {
+              plugin location="zellij:status-bar"
+          }
+      }
+    '';
+  };
+}
@@ -0,0 +1,230 @@
+# This is a default home.nix generated by the follwing hone-manager command
+#
+# home-manager init ./
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}: {
+  # Home Manager needs a bit of information about you and the paths it should
+  # manage.
+  home.username = lib.mkDefault "your-name";
+  home.homeDirectory = lib.mkDefault "/home/${config.home.username}";
+
+  # This value determines the Home Manager release that your configuration is
+  # compatible with. This helps avoid breakage when a new Home Manager release
+  # introduces backwards incompatible changes.
+  #
+  # You should not change this value, even if you update Home Manager. If you do
+  # want to update the value, then make sure to first check the Home Manager
+  # release notes.
+  home.stateVersion = "24.11"; # Please read the comment before changing.
+
+  # The home.packages option allows you to install Nix packages into your
+  # environment.
+  home.packages = with pkgs; [
+    aider-chat-env
+    libgtop
+    # # Adds the 'hello' command to your environment. It prints a friendly
+    # # "Hello, world!" when run.
+    # pkgs.hello
+
+    # # It is sometimes useful to fine-tune packages, for example, by applying
+    # # overrides. You can do that directly here, just don't forget the
+    # # parentheses. Maybe you want to install Nerd Fonts with a limited number of
+    # # fonts?
+    # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; })
+
+    # # You can also create simple shell scripts directly inside your
+    # # configuration. For example, this adds a command 'my-hello' to your
+    # # environment:
+    # (pkgs.writeShellScriptBin "my-hello" ''
+    #   echo "Hello, ${config.home.username}!"
+    # '')
+  ];
+
+  # Home Manager is pretty good at managing dotfiles. The primary way to manage
+  # plain files is through 'home.file'.
+  home.file = {
+    # # Building this configuration will create a copy of 'dotfiles/screenrc' in
+    # # the Nix store. Activating the configuration will then make '~/.screenrc' a
+    # # symlink to the Nix store copy.
+    # ".screenrc".source = dotfiles/screenrc;
+
+    # # You can also set the file content immediately.
+    # ".gradle/gradle.properties".text = ''
+    #   org.gradle.console=verbose
+    #   org.gradle.daemon.idletimeout=3600000
+    # '';
+  };
+
+  # Home Manager can also manage your environment variables through
+  # 'home.sessionVariables'. If you don't want to manage your shell through Home
+  # Manager then you have to manually source 'hm-session-vars.sh' located at
+  # either
+  #
+  #  ~/.nix-profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  /etc/profiles/per-user/m3tam3re/etc/profile.d/hm-session-vars.sh
+  #
+  home.sessionVariables = {
+    # EDITOR = "emacs";
+  };
+
+  # Let Home Manager install and manage itself.
+  programs.home-manager.enable = true;
+
+  services.cliphist = {
+    enable = true;
+    allowImages = true;
+  };
+
+  programs.git = {
+    enable = true;
+    difftastic.enable = true;
+    userName = "m3tam3re";
+    userEmail = "m@m3tam3re.com";
+    aliases = {
+      st = "status";
+      logd = "log --graph --pretty=format:'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit";
+    };
+    extraConfig = {
+      core.excludesfile = "~/.gitignore_global";
+      init.defaultBranch = "master";
+    };
+  };
+
+  programs.jujutsu = {
+    enable = true;
+    settings = {
+      user = {
+        email = "m@m3tam3re.com";
+        name = "Sascha Koenig";
+      };
+    };
+  };
+
+  programs.ssh = {
+    enable = true;
+    matchBlocks = {
+      "github.com" = {
+        hostname = "github.com";
+        user = "m3tam3re";
+        port = 22;
+        identityFile = "~/.ssh/github";
+      };
+      "code.m3tam3re.com" = {
+        hostname = "code.m3tam3re.com";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/gitea";
+      };
+      "lkk-nix-1" = {
+        hostname = "89.58.10.189";
+        user = "lkk-admin";
+        identityFile = "~/.ssh/lkk-admin";
+      };
+      "m3-r1" = {
+        hostname = "202.61.226.110";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "lkk-prod-test" = {
+        hostname = "192.168.122.215";
+        user = "root";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "lkk-prod-1" = {
+        hostname = "192.168.0.24";
+        user = "root";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "lkk-prod-2" = {
+        hostname = "192.168.0.20";
+        user = "root";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-deck" = {
+        hostname = "192.168.178.193";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-kratos-vm" = {
+        hostname = "192.168.122.43";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-hermes" = {
+        hostname = "95.216.214.142";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-helios" = {
+        hostname = "192.168.178.210";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-ares" = {
+        hostname = "192.168.1.30";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-atlas" = {
+        hostname = "152.53.85.162";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-zelda" = {
+        hostname = "95.217.189.186";
+        user = "m3tam3re";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "m3-skynet" = {
+        hostname = "m3-skynet";
+        user = "admin";
+        identityFile = "~/.ssh/m3tam3re";
+      };
+      "shp-old" = {
+        hostname = "95.217.3.250";
+        port = 2222;
+        user = "m3tam3re";
+        identityFile = "~/.ssh/self-host-playbook";
+      };
+      "shp-1" = {
+        hostname = "95.217.189.186";
+        port = 2222;
+        user = "m3tam3re";
+        identityFile = "~/.ssh/self-host-playbook";
+      };
+    };
+  };
+  programs.zellij-ps = {
+    enable = true;
+    projectFolders = [
+      "${config.home.homeDirectory}/p/c"
+      "${config.home.homeDirectory}/p"
+      "${config.home.homeDirectory}/.config"
+    ];
+    layout = ''
+      layout {
+          pane size=1 borderless=true {
+              plugin location="zellij:tab-bar"
+          }
+          pane size="70%" command="nvim"
+          pane split_direction="vertical" {
+              pane
+              pane command="unimatrix"
+          }
+          pane size=1 borderless=true {
+              plugin location="zellij:status-bar"
+          }
+      }
+    '';
+  };
+}
@@ -0,0 +1,102 @@
+{
+  config,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.hyprland;
+in {
+  imports = [
+    ../common
+    ./dotfiles
+    ./home.nix
+    ../features/cli
+    ../features/coding
+    ../features/desktop
+    #./services/librechat.nix
+  ];
+
+  options.features.desktop.hyprland.enable =
+    mkEnableOption "enable Hyprland";
+
+  config = mkMerge [
+    # Base configuration
+    {
+      xdg = {
+        # TODO: better structure
+        enable = true;
+        configFile."mimeapps.list".force = true;
+        mimeApps = {
+          enable = true;
+          associations.added = {
+            "application/zip" = ["org.gnome.FileRoller.desktop"];
+            "application/csv" = ["calc.desktop"];
+            "application/pdf" = ["vivaldi-stable.desktop"];
+            "x-scheme-handler/http" = ["vivaldi-stable.desktop"];
+            "x-scheme-handler/https" = ["vivaldi-stable.desktop"];
+          };
+          defaultApplications = {
+            "application/zip" = ["org.gnome.FileRoller.desktop"];
+            "application/csv" = ["calc.desktop"];
+            "application/pdf" = ["vivaldi-stable.desktop"];
+            "application/md" = ["dev.zed.Zed.desktop"];
+            "application/text" = ["dev.zed.Zed.desktop"];
+            "x-scheme-handler/http" = ["vivaldi-stable.desktop"];
+            "x-scheme-handler/https" = ["vivaldi-stable.desktop"];
+          };
+        };
+      };
+      features = {
+        cli = {
+          fish.enable = true;
+          nushell.enable = true;
+          skim.enable = true;
+          nitch.enable = true;
+          secrets.enable = true;
+          starship.enable = true;
+        };
+        desktop = {
+          coding.enable = true;
+          crypto.enable = true;
+          gaming.enable = true;
+          hyprland.enable = true;
+          media.enable = true;
+          office.enable = true;
+          rofi.enable = true;
+          fonts.enable = true;
+          wayland.enable = true;
+        };
+      };
+    }
+
+    (mkIf cfg.enable {
+      wayland.windowManager.hyprland = {
+        enable = true;
+        settings = {
+          monitor = [
+            "eDP-1,preferred,0x0,1.25"
+            "HDMI-A-1,preferred,2560x0,1"
+          ];
+          workspace = [
+            "1, monitor:eDP-1, default:true"
+            "2, monitor:eDP-1"
+            "3, monitor:eDP-1"
+            "4, monitor:HDMI-A-1"
+            "5, monitor:HDMI-A-1,border:false,rounding:false"
+            "6, monitor:HDMI-A-1"
+          ];
+          windowrule = [
+            "workspace 1,class:dev.zed.Zed"
+            "workspace 1,class:Msty"
+            "workspace 2,class:(com.obsproject.Studio)"
+            "workspace 4,opacity 1.0, class:(brave-browser)"
+            "workspace 4,opacity 1.0, class:(vivaldi-stable)"
+            "fullscreen,class:^steam_app_\\d+$"
+            "workspace 5,class:^steam_app_\\d+$"
+            "idleinhibit focus, class:^steam_app_\\d+$"
+          ];
+        };
+      };
+    })
+  ];
+}
@@ -0,0 +1,17 @@
+{
+  imports = [
+    ../common
+    ../features/cli
+    ./home-server.nix
+  ];
+
+  features = {
+    cli = {
+      nushell.enable = true;
+      skim.enable = true;
+      nitch.enable = true;
+      secrets.enable = false;
+      starship.enable = true;
+    };
+  };
+}
@@ -0,0 +1,17 @@
+{
+  imports = [
+    ../common
+    ../features/cli
+    ./home-server.nix
+  ];
+
+  features = {
+    cli = {
+      fish.enable = true;
+      fzf.enable = true;
+      nitch.enable = true;
+      secrets.enable = false;
+      starship.enable = true;
+    };
+  };
+}
@@ -0,0 +1,101 @@
+{
+  config,
+  lib,
+  ...
+}:
+with lib; let
+  cfg = config.features.desktop.hyprland;
+in {
+  imports = [
+    ../common
+    ./dotfiles
+    ./home.nix
+    ../features/cli
+    ../features/coding
+    ../features/desktop
+    ./services/librechat.nix
+  ];
+
+  options.features.desktop.hyprland.enable =
+    mkEnableOption "enable Hyprland";
+
+  config = mkMerge [
+    # Base configuration
+    {
+      xdg = {
+        # TODO: better structure
+        enable = true;
+        configFile."mimeapps.list".force = true;
+        mimeApps = {
+          enable = true;
+          associations.added = {
+            "application/zip" = ["org.gnome.FileRoller.desktop"];
+            "application/csv" = ["calc.desktop"];
+            "application/pdf" = ["vivaldi-stable.desktop"];
+            "x-scheme-handler/http" = ["vivaldi-stable.desktop"];
+            "x-scheme-handler/https" = ["vivaldi-stable.desktop"];
+          };
+          defaultApplications = {
+            "application/zip" = ["org.gnome.FileRoller.desktop"];
+            "application/csv" = ["calc.desktop"];
+            "application/pdf" = ["vivaldi-stable.desktop"];
+            "application/md" = ["dev.zed.Zed.desktop"];
+            "application/text" = ["dev.zed.Zed.desktop"];
+            "x-scheme-handler/http" = ["vivaldi-stable.desktop"];
+            "x-scheme-handler/https" = ["vivaldi-stable.desktop"];
+          };
+        };
+      };
+      features = {
+        cli = {
+          nushell.enable = true;
+          skim.enable = true;
+          nitch.enable = true;
+          secrets.enable = true;
+          starship.enable = true;
+        };
+        desktop = {
+          crypto.enable = true;
+          coding.enable = true;
+          gaming.enable = true;
+          hyprland.enable = true;
+          media.enable = true;
+          office.enable = true;
+          rofi.enable = true;
+          fonts.enable = true;
+          wayland.enable = true;
+        };
+      };
+    }
+
+    (mkIf cfg.enable {
+      wayland.windowManager.hyprland = {
+        enable = true;
+        settings = {
+          monitor = [
+            "DP-1,2560x1440@144,0x0,1"
+            "DP-2,2560x1440@144,2560x0,1"
+          ];
+          workspace = [
+            "1, monitor:DP-1, default:true"
+            "2, monitor:DP-1"
+            "3, monitor:DP-1"
+            "4, monitor:DP-2"
+            "5, monitor:DP-2"
+            "6, monitor:DP-2"
+            "7, monitor:DP-2"
+          ];
+
+          windowrule = [
+            "workspace 1,class:dev.zed.Zed"
+            "workspace 1,class:Msty"
+            "workspace 2,class:(com.obsproject.Studio)"
+            "workspace 4,opacity 1.0, class:(brave-browser)"
+            "workspace 4,opacity 1.0, class:(vivaldi-stable)"
+            "idleinhibit focus, class:^steam_app_\\d+$"
+          ];
+        };
+      };
+    })
+  ];
+}
@@ -0,0 +1,18 @@
+{
+  systemd.user.services.librechat = {
+    Unit = {
+      Description = "LibreChat Start";
+      After = ["network-online.target"];
+      Wants = ["network-online.target"];
+    };
+    Install = {WantedBy = ["default.target"];};
+    Service = {
+      Type = "oneshot";
+      RemainAfterExit = "yes";
+      WorkingDirectory = "/home/m3tam3re/p/r/ai/LibreChat";
+      ExecStart = "/run/current-system/sw/bin/podman-compose up -d";
+      ExecStop = "/run/current-system/sw/bin/podman-compose down";
+      Restart = "on-failure";
+    };
+  };
+}
@@ -0,0 +1,74 @@
+# Common configuration for all hosts
+{
+  pkgs,
+  lib,
+  inputs,
+  outputs,
+  ...
+}: {
+  imports = [
+    ./extraServices
+    ./users
+    inputs.home-manager.nixosModules.home-manager
+  ];
+
+  environment.pathsToLink = [
+    "/share/xdg-desktop-portal"
+    "/share/applications"
+  ];
+
+  home-manager = {
+    useUserPackages = true;
+    extraSpecialArgs = {inherit inputs outputs;};
+  };
+  nixpkgs = {
+    # You can add overlays here
+    overlays = [
+      # Add overlays your own flake exports (from overlays and pkgs dir):
+      outputs.overlays.additions
+      outputs.overlays.modifications
+      outputs.overlays.stable-packages
+      outputs.overlays.locked-packages
+      outputs.overlays.pinned-packages
+      outputs.overlays.master-packages
+
+      # You can also add overlays exported from other flakes:
+      # neovim-nightly-overlay.overlays.default
+
+      # Or define it inline, for example:
+      # (final: prev: {
+      #   hi = final.hello.overrideAttrs (oldAttrs: {
+      #     patches = [ ./change-hello-to-hi.patch ];
+      #   });
+      # })
+    ];
+    # Configure your nixpkgs instance
+    config = {
+      # Disable if you don't want unfree packages
+      allowUnfree = true;
+    };
+  };
+
+  nix = {
+    settings = {
+      experimental-features = "nix-command flakes";
+      cores = 2;
+      max-jobs = 8;
+      trusted-users = [
+        "root"
+        "m3tam3re"
+      ]; # Set users that are allowed to use the flake command
+    };
+    gc = {
+      automatic = true;
+      dates = "weekly";
+      options = "--delete-older-than 30d";
+    };
+    optimise.automatic = true;
+    registry =
+      (lib.mapAttrs (_: flake: {inherit flake;}))
+      ((lib.filterAttrs (_: lib.isType "flake")) inputs);
+    nixPath = ["/etc/nix/path"];
+  };
+  users.defaultUserShell = pkgs.nushell;
+}
@@ -0,0 +1,8 @@
+{
+  imports = [
+    ./flatpak.nix
+    ./podman.nix
+    ./ollama.nix
+    ./virtualisation.nix
+  ];
+}
@@ -0,0 +1,24 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.extraServices.flatpak;
+in {
+  options.extraServices.flatpak.enable = mkEnableOption "enable flatpak";
+
+  config = mkIf cfg.enable {
+    services.flatpak.enable = true;
+    xdg.portal = {
+      # xdg desktop intergration (required for flatpak)
+      enable = true;
+      wlr.enable = true;
+      extraPortals = with pkgs; [
+        xdg-desktop-portal-hyprland
+      ];
+      config.common.default = "*";
+    };
+  };
+}
@@ -0,0 +1,32 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.extraServices.ollama;
+in {
+  options.extraServices.ollama.enable = mkEnableOption "enable ollama";
+
+  config = mkIf cfg.enable {
+    services.ollama = {
+      enable = true;
+      acceleration =
+        if config.services.xserver.videoDrivers == ["amdgpu"]
+        then "rocm"
+        else if config.services.xserver.videoDrivers == ["nvidia"]
+        then "cuda"
+        else null;
+      host = "[::]";
+      openFirewall = true;
+      environmentVariables = {
+        OLLAMA_ORIGINS = "https://msty.studio";
+      };
+    };
+    nixpkgs.config = {
+      rocmSupport = config.services.xserver.videoDrivers == ["amdgpu"];
+      cudaSupport = config.services.xserver.videoDrivers == ["nvidia"];
+    };
+  };
+}
@@ -0,0 +1,33 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.extraServices.podman;
+in {
+  options.extraServices.podman.enable = mkEnableOption "enable podman";
+
+  config = mkIf cfg.enable {
+    virtualisation = {
+      podman = {
+        enable = true;
+        dockerCompat = true;
+        dockerSocket.enable = true;
+        autoPrune = {
+          enable = true;
+          dates = "weekly";
+          flags = [
+            "--filter=until=24h"
+            "--filter=label!=important"
+          ];
+        };
+        defaultNetwork.settings.dns_enabled = true;
+      };
+    };
+    environment.systemPackages = with pkgs; [
+      podman-compose
+    ];
+  };
+}
@@ -0,0 +1,35 @@
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+with lib; let
+  cfg = config.extraServices.virtualisation;
+in {
+  options.extraServices.virtualisation.enable = mkEnableOption "enable virtualisation";
+
+  config = mkIf cfg.enable {
+    virtualisation = {
+      libvirtd = {
+        enable = true;
+        qemu = {
+          package = pkgs.qemu_kvm;
+          runAsRoot = true;
+          swtpm.enable = true;
+          ovmf = {
+            enable = true;
+            packages = [
+              (pkgs.locked.OVMF.override {
+                secureBoot = true;
+                tpmSupport = true;
+              })
+              .fd
+            ];
+          };
+        };
+      };
+    };
+    programs.virt-manager.enable = true;
+  };
+}
@@ -0,0 +1,3 @@
+{
+  imports = [./m3tam3re.nix];
+}
@@ -0,0 +1,32 @@
+{
+  config,
+  pkgs,
+  inputs,
+  ...
+}: {
+  users.users.m3tam3re = {
+    #initialHashedPassword = "$y$j9T$IoChbWGYRh.rKfmm0G86X0$bYgsWqDRkvX.EBzJTX.Z0RsTlwspADpvEF3QErNyCMC";
+    password = "12345";
+    isNormalUser = true;
+    description = "m3tam3re";
+    extraGroups = [
+      "wheel"
+      "networkmanager"
+      "libvirtd"
+      "flatpak"
+      "audio"
+      "video"
+      "plugdev"
+      "input"
+      "kvm"
+      "qemu-libvirtd"
+      "adbusers"
+    ];
+    openssh.authorizedKeys.keys = [
+      "ssh-rsa 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 m3tam3re@m3-nix"
+    ];
+    packages = [inputs.home-manager.packages.${pkgs.system}.default];
+  };
+  home-manager.users.m3tam3re =
+    import ../../../home/m3tam3re/${config.networking.hostName}.nix;
+}
@@ -0,0 +1,138 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+{
+  config,
+  pkgs,
+  ...
+}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];
+
+  specialisation = {
+    "NVIDIA".configuration = {
+      boot.kernelParams = ["nvidia.NVreg_PreserveVideoMemoryAllocations=1"];
+      system.nixos.tags = ["NVIDIA"];
+      services.xserver.videoDrivers = ["nvidia"];
+      hardware.nvidia-container-toolkit.enable = true;
+    };
+  };
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.systemd-boot.memtest86.enable = true;
+  boot.initrd.services.lvm.enable = false;
+  boot.extraModulePackages = with config.boot.kernelPackages; [v4l2loopback];
+  boot.kernelModules = ["v4l2loopback"];
+
+  boot.extraModprobeConfig = ''
+    options kvm_intel nested=1
+    options kvm_intel emulate_invalid_guest_state=0
+    options kvm ignore_msrs=1
+    options v4l2loopback exclusive_caps=1 max_buffers=2
+  '';
+
+  networking.hostName = "m3-ares"; # Define your hostname.
+  # warp-terminal update fix
+  # networking.extraHosts = ''
+  #   127.0.0.1 releases.warp.dev
+  #   127.0.0.1 app.warp.dev
+  # '';
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable =
+    true; # Easiest to use and most distros use this by default.
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Enable the GNOME Desktop Environment.
+  # services.xserver.displayManager.gdm.enable = true;
+  # services.xserver.desktopManager.gnome.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [neovim git];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh = {
+    enable = true;
+    settings.PermitRootLogin = "no";
+    settings = {
+      PasswordAuthentication = false;
+    };
+  };
+  services.fstrim.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.11"; # Did you read the comment?
+}
@@ -0,0 +1,51 @@
+# A staring point is the basic NIXOS configuration generated by the ISO installer.
+# On an existing NIXOS install you can use the following command in your flakes basedir:
+# sudo nixos-generate-config --dir ./hosts/m3tam3re
+#
+# Please make sure to change the first couple of lines in your configuration.nix:
+# { config, inputs, ouputs, lib, pkgs, ... }:
+#
+# {
+#   imports = [ # Include the results of the hardware scan.
+#     ./hardware-configuration.nix
+#     inputs.home-manager.nixosModules.home-manager
+#   ];
+#   ...
+#
+# Moreover please update the packages option in your user configuration and add the home-manager options:
+# users.users = {
+#   m3tam3re = {
+#     isNormalUser = true;
+#     initialPassword = "12345";
+#     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+#     packages = [ inputs.home-manager.packages.${pkgs.system}.default ];
+#   };
+# };
+#
+# home-manager = {
+#   useUserPackages = true;
+#   extraSpecialArgs = { inherit inputs outputs; };
+#   users.m3tam3re =
+#     import ../../home/m3tam3re/${config.networking.hostName}.nix;
+# };
+#
+# Please also change your hostname accordingly:
+#:w
+# networking.hostName = "nixos"; # Define your hostname.
+{
+  imports = [
+    ../common
+    ./configuration.nix
+    ./hardware.nix
+    ./programs.nix
+    ./secrets.nix
+    ./services
+  ];
+
+  extraServices = {
+    flatpak.enable = true;
+    ollama.enable = true;
+    podman.enable = true;
+    virtualisation.enable = true;
+  };
+}
@@ -0,0 +1,73 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  modulesPath,
+  ...
+}: {
+  imports = [(modulesPath + "/installer/scan/not-detected.nix")];
+
+  boot.initrd.availableKernelModules = ["xhci_pci" "thunderbolt" "ahci" "nvme" "usb_storage" "sd_mod"];
+  boot.initrd.kernelModules = [];
+  boot.kernelModules = ["kvm-intel"];
+  boot.extraModulePackages = [];
+  boot.supportedFilesystems = ["nfs"];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/3a50bf0a-024b-488b-aa11-56b32f2fb54d";
+    fsType = "btrfs";
+    options = ["subvol=root" "compress=zstd"];
+  };
+
+  fileSystems."/home" = {
+    device = "/dev/disk/by-uuid/3a50bf0a-024b-488b-aa11-56b32f2fb54d";
+    fsType = "btrfs";
+    options = ["subvol=home" "compress=zstd"];
+  };
+
+  fileSystems."/nix" = {
+    device = "/dev/disk/by-uuid/3a50bf0a-024b-488b-aa11-56b32f2fb54d";
+    fsType = "btrfs";
+    options = ["subvol=home" "compress=zstd" "noatime"];
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/4811-EA6E";
+    fsType = "vfat";
+  };
+
+  fileSystems."/opt" = {
+    device = "/dev/disk/by-uuid/3574df3a-2a90-4b54-9c21-128f1d01ff8f";
+    fsType = "btrfs";
+    options = ["noatime" "compress=zstd"];
+  };
+
+  fileSystems."/mnt/skynet-bkg" = {
+    device = "192.168.1.100:/volume3/bkg";
+    fsType = "nfs";
+    options = ["noauto" "x-systemd.automount"];
+  };
+
+  fileSystems."/mnt/skynet" = {
+    device = "192.168.1.100:/volume3/m3-skynet";
+    fsType = "nfs";
+    options = ["noauto" "x-systemd.automount"];
+  };
+
+  swapDevices = [];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp46s0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlo1.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
+  hardware.cpu.intel.updateMicrocode =
+    lib.mkDefault config.hardware.enableRedistributableFirmware;
+}
@@ -0,0 +1,26 @@
+{
+  hardware.nvidia = {
+    prime = {
+      offload.enable = false;
+
+      # Bus ID of the Intel GPU. You can find it using lspci, either under 3D or VGA
+      intelBusId = "PCI:0:2:0";
+
+      # Bus ID of the NVIDIA GPU. You can find it using lspci, either under 3D or VGA
+      nvidiaBusId = "PCI:1:0:0";
+    };
+    modesetting.enable = true;
+    powerManagement.finegrained = false;
+    powerManagement.enable = true;
+    open = false;
+    dynamicBoost.enable = true;
+    nvidiaSettings = true;
+  };
+  hardware.bluetooth.enable = true;
+  hardware.keyboard.zsa.enable = true;
+  hardware.graphics.enable = true;
+
+  services.hardware.bolt.enable = true;
+  services.auto-cpufreq.enable = true;
+  services.tlp.enable = true;
+}
@@ -0,0 +1,45 @@
+{pkgs, ...}: {
+  programs.nix-ld.enable = true;
+  programs.nix-ld.libraries = with pkgs; [
+    # Add any missing dynamic libraries for unpackaged programs
+    # here, NOT in environment.systemPackages
+  ];
+  programs.hyprland = {
+    enable = true;
+    xwayland.enable = true;
+    withUWSM = true;
+  };
+  programs.steam = {
+    enable = true;
+    remotePlay.openFirewall = true;
+    dedicatedServer.openFirewall = true;
+    gamescopeSession = {
+      enable = true;
+      args = [
+        "-W 1920"
+        "-H 1080"
+      ];
+    };
+  };
+  programs.gamescope = {
+    enable = true;
+    capSysNice = true;
+  };
+  programs.fish.enable = true;
+  programs.thunar = {
+    enable = true;
+    plugins = with pkgs.xfce; [thunar-archive-plugin thunar-volman];
+  };
+  programs.gnupg.agent = {
+    enable = true;
+    enableSSHSupport = true;
+    pinentryPackage = pkgs.pinentry-gnome3;
+    settings = {default-cache-ttl = 10800;};
+  };
+  programs.nh = {
+    enable = true;
+    clean.enable = true;
+    clean.extraArgs = "--keep-since 4d --keep 3";
+    flake = "/home/m3tam3re/p/nixos/nixos-config";
+  };
+}
@@ -0,0 +1,31 @@
+{
+  age = {
+    secrets = {
+      wg-DE = {
+        file = ../../secrets/wg-DE.age;
+        path = "/etc/wireguard/DE.conf";
+      };
+      wg-NL = {
+        file = ../../secrets/wg-NL.age;
+        path = "/etc/wireguard/NL.conf";
+      };
+      wg-NO = {
+        file = ../../secrets/wg-NO.age;
+        path = "/etc/wireguard/NO.conf";
+      };
+      wg-US = {
+        file = ../../secrets/wg-US.age;
+        path = "/etc/wireguard/US.conf";
+      };
+      wg-BR = {
+        file = ../../secrets/wg-BR.age;
+        path = "/etc/wireguard/BR.conf";
+      };
+      tailscale-key.file = ../../secrets/tailscale-key.age;
+      m3tam3re-secrets = {
+        file = ../../secrets/m3tam3re-secrets.age;
+        owner = "m3tam3re";
+      };
+    };
+  };
+}
@@ -0,0 +1,4 @@
+{
+  imports = [
+  ];
+}
@@ -0,0 +1,36 @@
+{
+  imports = [
+    ./containers
+    #./n8n.nix
+    ./postgres.nix
+    ./restic.nix
+    ./sound.nix
+    ./tailscale.nix
+    ./udev.nix
+    ./wireguard.nix
+  ];
+  services = {
+    hypridle.enable = true;
+    printing.enable = true;
+    gvfs.enable = true;
+    trezord.enable = true;
+    gnome.gnome-keyring.enable = true;
+    qdrant.enable = true;
+    upower.enable = true;
+    avahi = {
+      enable = true;
+      nssmdns4 = true;
+      publish = {
+        addresses = true;
+        workstation = true;
+        userServices = true;
+      };
+    };
+  };
+  systemd.sleep.extraConfig = ''
+    AllowSuspend=no
+    AllowHibernation=no
+    AllowHybridSleep=no
+    AllowSuspendThenHibernate=no
+  '';
+}
@@ -0,0 +1,11 @@
+{
+  services.n8n = {
+    enable = true;
+    openFirewall = true;
+  };
+  systemd.services.n8n = {
+    environment = {
+      N8N_SECURE_COOKIE = "false";
+    };
+  };
+}
@@ -0,0 +1,22 @@
+{pkgs, ...}: {
+  services.postgresql = {
+    enable = true;
+    package = pkgs.postgresql_17;
+    extensions = with pkgs.postgresql17Packages; [
+      pgvector
+    ];
+    authentication = ''
+      local all all trust
+      host all all 127.0.0.1/32 trust
+      host all all ::1/128 trust
+
+      host all all 10.88.0.0/16 trust
+      host all all 19.89.0.0/16 trust
+    '';
+    initialScript = pkgs.writeText "initialScript.sql" ''
+      CREATE USER n8n WITH PASSWORD 'n8n';
+      CREATE DATABASE n8n;
+      GRANT ALL PRIVILEGES ON DATABASE n8n TO n8n;
+    '';
+  };
+}
@@ -0,0 +1,25 @@
+{
+  services.restic.backups = {
+    skynet = {
+      repository = "/mnt/skynet-bkg/m3-nix";
+      passwordFile = "/etc/nixos/restic-pass";
+      initialize = true;
+      paths = ["/home/m3tam3re"];
+      exclude = [
+        "/home/m3tam3re/.cache"
+        "/home/m3tam3re/Bilder/"
+        "/home/m3tam3re/Videos/"
+        "/home/m3tam3re/Downloads"
+        "/home/m3tam3re/Library"
+        "/home/m3tam3re/Projekte"
+        "/home/m3tam3re/Sync"
+        "/home/m3tam3re/.local/share/Trash"
+      ];
+      timerConfig = {
+        OnCalendar = "09:30";
+        RandomizedDelaySec = "2h";
+        Persistent = true;
+      };
+    };
+  };
+}
@@ -0,0 +1,13 @@
+{pkgs, ...}: {
+  environment.systemPackages = with pkgs; [
+  ];
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    jack.enable = false;
+    wireplumber.enable = true;
+  };
+}
@@ -0,0 +1,40 @@
+{
+  config,
+  pkgs,
+  ...
+}: {
+  services.tailscale = {
+    enable = true;
+    useRoutingFeatures = "client";
+  };
+
+  # systemd.services.tailscale-autoconnect = {
+  #   description = "Automatic connection to Tailscale";
+
+  #   # make sure tailscale is running before trying to connect to tailscale
+  #   after = ["network-pre.target" "tailscale.service"];
+  #   wants = ["network-pre.target" "tailscale.service"];
+  #   wantedBy = ["multi-user.target"];
+
+  #   # set this service as a oneshot job
+  #   serviceConfig = {
+  #     Type = "oneshot";
+  #     EnvironmentFile = "${config.age.secrets.tailscale-key.path}";
+  #   };
+
+  #   # have the job run this shell script
+  #   script = with pkgs; ''
+  #     # wait for tailscaled to settle
+  #     sleep 2
+
+  #     # check if we are already authenticated to tailscale
+  #     status="$(${tailscale}/bin/tailscale status -json | ${jq}/bin/jq -r .BackendState)"
+  #     if [ $status = "Running" ]; then # if so, then do nothing
+  #       exit 0
+  #     fi
+
+  #     # otherwise authenticate with tailscale
+  #     ${tailscale}/bin/tailscale up --exit-node 100.88.96.77 --authkey $TAILSCALE_KEY
+  #   '';
+  # };
+}
@@ -0,0 +1,8 @@
+{pkgs, ...}: {
+  services.udev.extraRules = ''
+    SUBSYSTEM=="usb", MODE="0666
+  '';
+  environment.systemPackages = with pkgs; [
+    zsa-udev-rules
+  ];
+}
@@ -0,0 +1,25 @@
+{config, ...}: {
+  networking.wg-quick.interfaces = {
+    DE = {
+      configFile = config.age.secrets.wg-DE.path;
+      autostart = false;
+    };
+    NL = {
+      configFile = config.age.secrets.wg-NL.path;
+      autostart = false;
+    };
+    NO = {
+      configFile = config.age.secrets.wg-NO.path;
+      autostart = true;
+    };
+    US = {
+      configFile = config.age.secrets.wg-US.path;
+      autostart = false;
+    };
+    BR = {
+      configFile = config.age.secrets.wg-BR.path;
+      autostart = false;
+    };
+  };
+  services.resolved.enable = true;
+}
@@ -0,0 +1,112 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+{pkgs, ...}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./disko-config.nix
+    ./hardware-configuration.nix
+  ];
+
+  # Bootloader.
+  boot.loader.grub = {
+    efiSupport = true;
+    efiInstallAsRemovable = true;
+  };
+
+  networking.hostName = "m3-atlas"; # CHANGE ME.
+  networking.hostId = "15b60253"; # CHANGE ME
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable = true; # Easiest to use and most distros use this by default.
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Enable the GNOME Desktop Environment.
+  # services.xserver.displayManager.gdm.enable = true;
+  # services.xserver.desktopManager.gnome.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [neovim git];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh = {
+    enable = true;
+    settings.PermitRootLogin = "no";
+    settings = {
+      PasswordAuthentication = false;
+    };
+  };
+
+  # [[Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.11"; # Did you read the comment?
+}
@@ -0,0 +1,50 @@
+# A staring point is the basic NIXOS configuration generated by the ISO installer.
+# On an existing NIXOS install you can use the following command in your flakes basedir:
+# sudo nixos-generate-config --dir ./hosts/m3tam3re
+#
+# Please make sure to change the first couple of lines in your configuration.nix:
+# { config, inputs, ouputs, lib, pkgs, ... }:
+#
+# {
+#   imports = [ # Include the results of the hardware scan.
+#     ./hardware-configuration.nix
+#     inputs.home-manager.nixosModules.home-manager
+#   ];
+#   ...
+#
+# Moreover please update the packages option in your user configuration and add the home-manager options:
+# users.users = {
+#   m3tam3re = {
+#     isNormalUser = true;
+#     initialPassword = "12345";
+#     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+#     packages = [ inputs.home-manager.packages.${pkgs.system}.default ];
+#   };
+# };
+#
+# home-manager = {
+#   useUserPackages = true;
+#   extraSpecialArgs = { inherit inputs outputs; };
+#   users.m3tam3re =
+#     import ../../home/m3tam3re/${config.networking.hostName}.nix;
+# };
+#
+# Please also change your hostname accordingly:
+#:w
+# networking.hostName = "nixos"; # Define your hostname.
+{
+  imports = [
+    ../common
+    ./configuration.nix
+    ./programs.nix
+    ./secrets.nix
+    ./services
+  ];
+
+  extraServices = {
+    flatpak.enable = false;
+    ollama.enable = false;
+    podman.enable = true;
+    virtualisation.enable = false;
+  };
+}
@@ -0,0 +1,39 @@
+{
+  disko.devices = {
+    disk = {
+      main = {
+        type = "disk";
+        device = "/dev/vda"; # CHANGE ME
+        content = {
+          type = "gpt";
+          partitions = {
+            boot = {
+              size = "1M";
+              type = "EF02"; # for GRUB MBR
+              priority = 1;
+            };
+            esp = {
+              size = "512M";
+              type = "EF00";
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+                mountOptions = ["defaults" "umask=0077"];
+              };
+            };
+            root = {
+              size = "100%";
+              content = {
+                type = "filesystem";
+                format = "ext4";
+                mountpoint = "/";
+                mountOptions = ["noatime" "nodiratime" "discard"];
+              };
+            };
+          };
+        };
+      };
+    };
+  };
+}
@@ -0,0 +1,31 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  lib,
+  modulesPath,
+  ...
+}: {
+  imports = [
+    (modulesPath + "/profiles/qemu-guest.nix")
+  ];
+
+  boot.initrd.availableKernelModules = ["ata_piix" "uhci_hcd" "virtio_pci" "virtio_scsi" "sd_mod" "sr_mod"];
+  boot.initrd.kernelModules = [];
+  boot.kernelModules = [];
+  boot.extraModulePackages = [];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+
+  fileSystems."/var/storage" = {
+    device = "46.38.248.210:/voln723044a1";
+    fsType = "nfs";
+  };
+}
@@ -0,0 +1,14 @@
+{pkgs, ...}: {
+  programs.nix-ld.enable = true;
+  programs.nix-ld.libraries = with pkgs; [
+    # Add any missing dynamic libraries for unpackaged programs
+    # here, NOT in environment.systemPackages
+  ];
+  programs.fish.enable = true;
+  programs.nh = {
+    enable = true;
+    clean.enable = true;
+    clean.extraArgs = "--keep-since 4d --keep 3";
+    flake = "/home/m3tam3re/p/nixos/nixos-config";
+  };
+}
@@ -0,0 +1,38 @@
+{
+  age = {
+    secrets = {
+      baserow-env = {
+        file = ../../secrets/baserow-env.age;
+      };
+      ghost-env = {
+        file = ../../secrets/ghost-env.age;
+      };
+      littlelink-m3tam3re = {
+        file = ../../secrets/littlelink-m3tam3re.age;
+      };
+      minio-root-cred = {
+        file = ../../secrets/minio-root-cred.age;
+      };
+      n8n-env = {
+        file = ../../secrets/n8n-env.age;
+      };
+      restreamer-env = {
+        file = ../../secrets/restreamer-env.age;
+      };
+      searx = {
+        file = ../../secrets/searx.age;
+      };
+      tailscale-key = {
+        file = ../../secrets/tailscale-key.age;
+      };
+      traefik = {
+        file = ../../secrets/traefik.age;
+        owner = "traefik";
+      };
+      m3tam3re-secrets = {
+        file = ../../secrets/m3tam3re-secrets.age;
+        owner = "m3tam3re";
+      };
+    };
+  };
+}
@@ -0,0 +1,35 @@
+{config, ...}: {
+  virtualisation.oci-containers.containers."baserow" = {
+    image = "docker.io/baserow/baserow:1.31.1";
+    environmentFiles = [config.age.secrets.baserow-env.path];
+    ports = ["127.0.0.1:3001:80"];
+    volumes = ["baserow_data:/baserow/data"];
+    extraOptions = ["--add-host=postgres:10.89.0.1" "--ip=10.89.0.10" "--network=web"];
+  };
+  # Traefik configuration specific to baserow
+  services.traefik.dynamicConfigOptions.http = {
+    services.baserow.loadBalancer.servers = [
+      {
+        url = "http://localhost:3001/";
+      }
+    ];
+
+    routers.baserow = {
+      rule = "Host(`br.m3ta.dev`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "baserow";
+      entrypoints = "websecure";
+    };
+    routers.baserow-old = {
+      rule = "Host(`br.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "baserow";
+      entrypoints = "websecure";
+      middlewares = ["subdomain-redirect"];
+    };
+  };
+}
@@ -0,0 +1,17 @@
+{lib, ...}: {
+  imports = [
+    ./baserow.nix
+    ./ghost.nix
+    ./littlelink.nix
+    ./matomo.nix
+    # ./n8n.nix
+    # ./pangolin.nix
+    ./restreamer.nix
+    ./slash.nix
+  ];
+  system.activationScripts.createPodmanNetworkWeb = lib.mkAfter ''
+    if ! /run/current-system/sw/bin/podman network exists web; then
+      /run/current-system/sw/bin/podman network create web --subnet=10.89.0.0/24 --internal
+    fi
+  '';
+}
@@ -0,0 +1,37 @@
+{config, ...}: {
+  virtualisation.oci-containers.containers."ghost" = {
+    image = "docker.io/ghost:latest";
+    environmentFiles = [config.age.secrets.ghost-env.path];
+    ports = ["127.0.0.1:3002:2368"];
+    volumes = ["ghost_data:/var/lib/ghost/content"];
+    extraOptions = ["--add-host=mysql:10.89.0.1" "--ip=10.89.0.11" "--network=web"];
+  };
+  # Traefik configuration specific to ghost
+  services.traefik.dynamicConfigOptions.http = {
+    services.ghost.loadBalancer.servers = [
+      {
+        url = "http://localhost:3002/";
+      }
+    ];
+    routers = {
+      ghost = {
+        rule = "Host(`m3ta.dev`) || Host(`www.m3ta.dev`)";
+        tls = {
+          certResolver = "godaddy";
+        };
+        service = "ghost";
+        entrypoints = "websecure";
+        middlewares = ["strip-www"];
+      };
+      ghost-old = {
+        rule = "Host(`www.m3tam3re.com`)";
+        tls = {
+          certResolver = "godaddy";
+        };
+        service = "ghost";
+        entrypoints = "websecure";
+        middlewares = ["domain-redirect"];
+      };
+    };
+  };
+}
@@ -0,0 +1,25 @@
+{config, ...}: {
+  virtualisation.oci-containers.containers."littlelink_m3tam3re" = {
+    image = "ghcr.io/techno-tim/littlelink-server";
+    environmentFiles = [config.age.secrets.littlelink-m3tam3re.path];
+    ports = ["127.0.0.1:3004:3000"];
+    extraOptions = ["--ip=10.89.0.4" "--network=web"];
+  };
+  # Traefik configuration specific to littlelink
+  services.traefik.dynamicConfigOptions.http = {
+    services.littlelink-m3tam3re.loadBalancer.servers = [
+      {
+        url = "http://localhost:3004/";
+      }
+    ];
+
+    routers.littlelink-m3tam3re = {
+      rule = "Host(`links.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "littlelink-m3tam3re";
+      entrypoints = "websecure";
+    };
+  };
+}
@@ -0,0 +1,43 @@
+{
+  virtualisation.oci-containers.containers."matomo" = {
+    image = "docker.io/matomo:latest";
+    ports = ["127.0.0.1:3011:80"];
+    volumes = ["matomo_data:/var/www/html"];
+    environment = {
+      MATOMO_DATABASE_HOST = "mysql";
+      MATOMO_DATABASE_USERNAME = "matomo";
+      MATOMO_DATABASE_PASSWORD = "matomo";
+      MATOMO_DATABASE_DBNAME = "matomo";
+      MYSQL_DATABASE = "matomo";
+      PHP_MEMORY_LIMIT = "2048M";
+    };
+    extraOptions = ["--add-host=mysql:10.89.0.1" "--ip=10.89.0.16" "--network=web"];
+  };
+  # Traefik configuration specific to ghost
+  services.traefik.dynamicConfigOptions.http = {
+    services.matomo.loadBalancer.servers = [
+      {
+        url = "http://localhost:3011/";
+      }
+    ];
+
+    routers = {
+      matomo-nemoti = {
+        rule = "Host(`stats.nemoti.com`)";
+        tls = {
+          certResolver = "godaddy";
+        };
+        service = "matomo";
+        entrypoints = "websecure";
+      };
+      matomo-m3tam3re = {
+        rule = "Host(`stats.m3tam3re.com`)";
+        tls = {
+          certResolver = "godaddy";
+        };
+        service = "matomo";
+        entrypoints = "websecure";
+      };
+    };
+  };
+}
@@ -0,0 +1,27 @@
+{config, ...}: {
+  virtualisation.oci-containers.containers."n8n" = {
+    image = "docker.n8n.io/n8nio/n8n";
+    environmentFiles = [config.age.secrets.n8n-env.path];
+    ports = ["127.0.0.1:5678:5678"];
+    volumes = ["n8n_data:/home/node/.n8n"];
+    extraOptions = ["--add-host=postgres:10.89.0.1" "--ip=10.89.0.14" "--network=web"];
+  };
+
+  # Traefik configuration specific to n8n
+  services.traefik.dynamicConfigOptions.http = {
+    services.n8n.loadBalancer.servers = [
+      {
+        url = "http://localhost:5678/";
+      }
+    ];
+
+    routers.n8n = {
+      rule = "Host(`wf.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "n8n";
+      entrypoints = "websecure";
+    };
+  };
+}
@@ -0,0 +1,211 @@
+{
+  config,
+  pkgs,
+  lib,
+  ...
+}: let
+  # Define the Pangolin configuration as a Nix attribute set
+  pangolinConfig = {
+    app = {
+      dashboard_url = "https://vpn.m3tam3re.com";
+      log_level = "info";
+      save_logs = false;
+    };
+
+    domains = {
+      vpn = {
+        base_domain = "m3tam3re.com";
+        cert_resolver = "godaddy";
+        prefer_wildcard_cert = false;
+      };
+    };
+
+    server = {
+      external_port = 3000;
+      internal_port = 3001;
+      next_port = 3002;
+      internal_hostname = "pangolin";
+      session_cookie_name = "p_session_token";
+      resource_access_token_param = "p_token";
+      resource_session_request_param = "p_session_request";
+    };
+
+    traefik = {
+      cert_resolver = "godaddy";
+      http_entrypoint = "web";
+      https_entrypoint = "websecure";
+    };
+
+    gerbil = {
+      start_port = 51820;
+      base_endpoint = "vpn.m3tam3re.com";
+      use_subdomain = false;
+      block_size = 24;
+      site_block_size = 30;
+      subnet_group = "100.89.137.0/20";
+    };
+
+    rate_limits = {
+      global = {
+        window_minutes = 1;
+        max_requests = 100;
+      };
+    };
+
+    email = {
+      smtp_host = config.age.secrets.smtp-host.path;
+      smtp_port = 587;
+      smtp_user = config.age.secrets.smtp-user.path;
+      smtp_pass = config.age.secrets.smtp-pass.path;
+      no_reply = config.age.secrets.smtp-user.path;
+    };
+
+    users = {
+      server_admin = {
+        email = "admin@m3tam3re.com";
+        password = config.age.secrets.pangolin-admin-password.path;
+      };
+    };
+
+    flags = {
+      require_email_verification = true;
+      disable_signup_without_invite = true;
+      disable_user_create_org = true;
+      allow_raw_resources = true;
+      allow_base_domain_resources = true;
+    };
+  };
+
+  # Convert Nix attribute set to YAML using a simpler approach
+  pangolinConfigYaml = pkgs.writeTextFile {
+    name = "config.yml";
+    text = lib.generators.toYAML {} pangolinConfig;
+  };
+in {
+  # Define the containers
+  virtualisation.oci-containers.containers = {
+    "pangolin" = {
+      image = "fosrl/pangolin:1.1.0";
+      autoStart = true;
+      volumes = [
+        "${pangolinConfigYaml}:/app/config/config.yml:ro" # Mount the config file directly
+        "pangolin_config:/app/config/data" # Volume for persistent data
+      ];
+      ports = [
+        "127.0.0.1:3020:3001" # API server
+        "127.0.0.1:3021:3002" # Next.js server
+        "127.0.0.1:3022:3000" # API/WebSocket server
+      ];
+      extraOptions = ["--ip=10.89.0.20" "--network=web"];
+    };
+
+    "gerbil" = {
+      image = "fosrl/gerbil:1.0.0";
+      autoStart = true;
+      volumes = [
+        "pangolin_config:/var/config" # Share the volume for persistent data
+      ];
+      cmd = [
+        "--reachableAt=http://gerbil:3003"
+        "--generateAndSaveKeyTo=/var/config/key"
+        "--remoteConfig=http://pangolin:3001/api/v1/gerbil/get-config"
+        "--reportBandwidthTo=http://pangolin:3001/api/v1/gerbil/receive-bandwidth"
+      ];
+      ports = [
+        "51820:51820/udp" # WireGuard port
+      ];
+      extraOptions = [
+        "--ip=10.89.0.21"
+        "--network=web"
+        "--cap-add=NET_ADMIN"
+        "--cap-add=SYS_MODULE"
+      ];
+    };
+  };
+
+  # Secrets for Pangolin
+  # age.secrets = {
+  #   "smtp-host" = {
+  #     file = ../secrets/smtp-host.age;
+  #     owner = "root";
+  #     group = "root";
+  #     mode = "0400";
+  #   };
+  #   "smtp-user" = {
+  #     file = ../secrets/smtp-user.age;
+  #     owner = "root";
+  #     group = "root";
+  #     mode = "0400";
+  #   };
+  #   "smtp-pass" = {
+  #     file = ../secrets/smtp-pass.age;
+  #     owner = "root";
+  #     group = "root";
+  #     mode = "0400";
+  #   };
+  #   "pangolin-admin-password" = {
+  #     file = ../secrets/pangolin-admin-password.age;
+  #     owner = "root";
+  #     group = "root";
+  #     mode = "0400";
+  #   };
+  # };
+
+  # Traefik configuration for Pangolin
+  services.traefik.dynamicConfigOptions = {
+    http = {
+      # Next.js service (front-end)
+      services.pangolin-next-service.loadBalancer.servers = [
+        {url = "http://localhost:3021";}
+      ];
+
+      # API service
+      services.pangolin-api-service.loadBalancer.servers = [
+        {url = "http://localhost:3022";}
+      ];
+
+      # Routers
+      routers = {
+        # Next.js router (handles everything except API paths)
+        "pangolin-next" = {
+          rule = "Host(`vpn.m3tam3re.com`) && !PathPrefix(`/api/v1`)";
+          service = "pangolin-next-service";
+          entrypoints = ["websecure"];
+          tls = {
+            certResolver = "godaddy";
+          };
+        };
+
+        # API router
+        "pangolin-api" = {
+          rule = "Host(`vpn.m3tam3re.com`) && PathPrefix(`/api/v1`)";
+          service = "pangolin-api-service";
+          entrypoints = ["websecure"];
+          tls = {
+            certResolver = "godaddy";
+          };
+        };
+      };
+    };
+  };
+
+  # Add HTTP provider to Traefik for dynamic configuration from Pangolin
+  services.traefik.staticConfigOptions.providers.http = {
+    endpoint = "http://localhost:3020/api/v1/traefik-config";
+    pollInterval = "5s";
+  };
+
+  # Add experimental section for Badger plugin
+  services.traefik.staticConfigOptions.experimental = {
+    plugins = {
+      #TODO create an overlay for the plugin
+      badger = {
+        moduleName = "github.com/fosrl/badger";
+        version = "v1.0.0";
+      };
+    };
+  };
+
+  # Firewall configuration for WireGuard
+  networking.firewall.allowedUDPPorts = [51820]; # WireGuard port
+}
@@ -0,0 +1,75 @@
+{config, ...}: {
+  virtualisation.oci-containers.containers."restreamer" = {
+    image = "docker.io/datarhei/restreamer:latest";
+    environmentFiles = [config.age.secrets.restreamer-env.path];
+    # Modified ports to include RTMPS
+    ports = [
+      "127.0.0.1:3006:8080" # Web UI
+      "127.0.0.1:1936:1935" # RTMP
+    ];
+    volumes = [
+      "restreamer_data:/core/data"
+      "restreamer_config:/core/config"
+    ];
+    extraOptions = ["--add-host=postgres:10.89.0.1" "--ip=10.89.0.13" "--network=web"];
+  };
+
+  # Traefik configuration
+  services.traefik = {
+    dynamicConfigOptions = {
+      http = {
+        services.restreamer.loadBalancer.servers = [
+          {
+            url = "http://localhost:3006/";
+          }
+        ];
+
+        routers.restreamer = {
+          rule = "Host(`stream.m3ta.dev`)";
+          tls = {
+            certResolver = "godaddy";
+          };
+          service = "restreamer";
+          entrypoints = ["websecure"];
+        };
+      };
+
+      tcp = {
+        services = {
+          rtmp-service.loadBalancer.servers = [
+            {
+              address = "localhost:1936";
+            }
+          ];
+          rtmps-service.loadBalancer.servers = [
+            {
+              address = "localhost:1936";
+            }
+          ];
+        };
+
+        routers = {
+          rtmp = {
+            rule = "HostSNI(`*`)"; # Changed to accept all SNI
+            service = "rtmp-service";
+            entryPoints = ["rtmp"];
+          };
+          rtmps = {
+            rule = "HostSNI(`stream.m3tam3re.com`)";
+            service = "rtmps-service";
+            entryPoints = ["rtmps"];
+            tls = {
+              certResolver = "godaddy";
+              passthrough = false;
+            };
+          };
+        };
+      };
+    };
+  };
+
+  # Firewall configuration
+  networking.firewall = {
+    allowedTCPPorts = [1935 1945];
+  };
+}
@@ -0,0 +1,27 @@
+{
+  virtualisation.oci-containers.containers."slash" = {
+    image = "docker.io/yourselfhosted/slash:latest";
+    ports = ["127.0.0.1:3010:5231"];
+    volumes = [
+      "slash_data:/var/opt/slash"
+    ];
+    extraOptions = ["--ip=10.89.0.15" "--network=web"];
+  };
+  # Traefik configuration specific to littlelink
+  services.traefik.dynamicConfigOptions.http = {
+    services.slash.loadBalancer.servers = [
+      {
+        url = "http://localhost:3010/";
+      }
+    ];
+
+    routers.slash = {
+      rule = "Host(`l.m3ta.dev`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "slash";
+      entrypoints = "websecure";
+    };
+  };
+}
@@ -0,0 +1,15 @@
+{
+  imports = [
+    ./containers
+    ./gitea.nix
+    ./headscale.nix
+    ./minio.nix
+    ./mysql.nix
+    ./n8n.nix
+    ./postgres.nix
+    ./searx.nix
+    ./tailscale.nix
+    ./traefik.nix
+    ./wastebin.nix
+  ];
+}
@@ -0,0 +1,42 @@
+{
+  services.gitea = {
+    enable = true;
+    settings = {
+      server.ROOT_URL = "https://code.m3ta.dev";
+      service.DISABLE_REGISTRATION = true;
+    };
+    lfs.enable = true;
+    dump = {
+      enable = true;
+      type = "tar.gz";
+      interval = "03:30:00";
+      backupDir = "/var/backup/gitea";
+    };
+  };
+  # Traefik configuration specific to gitea
+  services.traefik.dynamicConfigOptions.http = {
+    services.gitea.loadBalancer.servers = [
+      {
+        url = "http://localhost:3000/";
+      }
+    ];
+
+    routers.gitea = {
+      rule = "Host(`code.m3ta.dev`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "gitea";
+      entrypoints = "websecure";
+    };
+    routers.gitea-old = {
+      rule = "Host(`code.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "gitea";
+      entrypoints = "websecure";
+      middlewares = ["subdomain-redirect"];
+    };
+  };
+}
@@ -0,0 +1,121 @@
+{
+  pkgs,
+  config,
+  lib,
+  ...
+}: {
+  # Define a new option for the admin user
+  options.services.headscale = {
+    adminUser = lib.mkOption {
+      type = lib.types.str;
+      default = "m3tam3re";
+      description = "Username for the headscale admin user";
+    };
+  };
+
+  config = let
+    adminUser = config.services.headscale.adminUser;
+
+    aclConfig = {
+      # Groups definition
+      groups = {
+        "group:admins" = ["${adminUser}"];
+      };
+
+      acls = [
+        # Allow all connections within the tailnet
+        {
+          action = "accept";
+          src = ["*"];
+          dst = ["*:*"];
+        }
+        # Allow admin to connect to their own services
+        {
+          action = "accept";
+          src = ["${adminUser}"];
+          dst = ["${adminUser}:*"];
+        }
+      ];
+
+      # Auto-approvers section for routes
+      autoApprovers = {
+        routes = {
+          "0.0.0.0/0" = ["${adminUser}"];
+          "10.0.0.0/8" = ["${adminUser}"];
+          "172.16.0.0/12" = ["${adminUser}"];
+          "192.168.0.0/16" = ["${adminUser}"];
+        };
+
+        exitNode = ["${adminUser}"];
+      };
+    };
+
+    # Convert to HuJSON format with comments
+    aclHuJson = ''
+      // Headscale ACL Policy - Generated by NixOS
+      // Admin user: ${adminUser}
+
+      ${builtins.toJSON aclConfig}
+    '';
+
+    aclFile = pkgs.writeText "acl-policy.hujson" aclHuJson;
+  in {
+    services = {
+      headscale = {
+        enable = true;
+        port = 3009;
+        adminUser = "m3tam3re";
+        settings = {
+          server_url = "https://va.m3tam3re.com";
+          dns = {
+            base_domain = "m3ta.loc";
+          };
+          logtail.enabled = false;
+          policy.path = "${aclFile}";
+        };
+      };
+    };
+
+    # Traefik configuration
+    services.traefik.dynamicConfigOptions.http = {
+      services.headscale.loadBalancer.servers = [
+        {
+          url = "http://localhost:3009/";
+        }
+      ];
+
+      routers.headscale = {
+        rule = "Host(`va.m3tam3re.com`)";
+        tls = {
+          certResolver = "godaddy";
+        };
+        service = "headscale";
+        entrypoints = "websecure";
+      };
+    };
+
+    # Create a systemd service to ensure the admin user exists
+    systemd.services.headscale-ensure-admin = lib.mkIf config.services.headscale.enable {
+      description = "Ensure Headscale admin user exists";
+      after = ["headscale.service"];
+      requires = ["headscale.service"];
+      wantedBy = ["multi-user.target"];
+      serviceConfig = {
+        Type = "oneshot";
+        RemainAfterExit = true;
+        User = "headscale";
+        Group = "headscale";
+      };
+
+      script = ''
+        # Check if user exists and create if needed
+        if ! ${pkgs.headscale}/bin/headscale users list | grep -q "${adminUser}"; then
+          echo "Creating headscale admin user: ${adminUser}"
+          ${pkgs.headscale}/bin/headscale users create "${adminUser}"
+        else
+          echo "Headscale admin user ${adminUser} already exists"
+        fi
+      '';
+    };
+  };
+}
@@ -0,0 +1,41 @@
+{config, ...}: {
+  services.minio = {
+    enable = true;
+    region = "eu-central-1";
+    consoleAddress = ":3007";
+    listenAddress = ":3008";
+    browser = true;
+    rootCredentialsFile = config.age.secrets.minio-root-cred.path;
+    dataDir = ["/var/storage/s3"];
+  };
+  # Traefik configuration specific to minio
+  services.traefik.dynamicConfigOptions.http = {
+    services.minio-console.loadBalancer.servers = [
+      {
+        url = "http://localhost:3007/";
+      }
+    ];
+    services.minio.loadBalancer.servers = [
+      {
+        url = "http://localhost:3008/";
+      }
+    ];
+
+    routers.minio = {
+      rule = "Host(`s3.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "minio";
+      entrypoints = "websecure";
+    };
+    routers.minio-console = {
+      rule = "Host(`minio.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "minio-console";
+      entrypoints = "websecure";
+    };
+  };
+}
@@ -0,0 +1,22 @@
+{pkgs, ...}: {
+  services.mysql = {
+    enable = true;
+    package = pkgs.mysql84;
+    ensureDatabases = [
+      "ghost"
+      "matomo"
+    ];
+    initialScript = pkgs.writeText "initial-script.sql" ''
+      CREATE USER 'ghost'@'10.89.%' IDENTIFIED BY 'ghost';
+      GRANT ALL PRIVILEGES ON ghost.* TO 'ghost'@'10.89.%';
+
+      CREATE USER 'matomo'@'10.89.%' IDENTIFIED BY 'matomo';
+      GRANT ALL PRIVILEGES ON matomo.* TO 'matomo'@'10.89.%'; '';
+  };
+  services.mysqlBackup = {
+    enable = true;
+    calendar = "03:00:00";
+    databases = ["ghost" "matomo"];
+  };
+  networking.firewall.allowedTCPPorts = [3306];
+}
@@ -0,0 +1,26 @@
+{config, ...}: {
+  services.n8n = {
+    enable = true;
+    webhookUrl = "https://wf.m3tam3re.com";
+  };
+  systemd.services.n8n.serviceConfig = {
+    EnvironmentFile = ["${config.age.secrets.n8n-env.path}"];
+  };
+  # Traefik configuration specific to n8n
+  services.traefik.dynamicConfigOptions.http = {
+    services.n8n.loadBalancer.servers = [
+      {
+        url = "http://localhost:5678/";
+      }
+    ];
+
+    routers.n8n = {
+      rule = "Host(`wf.m3ta.dev`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "n8n";
+      entrypoints = "websecure";
+    };
+  };
+}
@@ -0,0 +1,24 @@
+{pkgs, ...}: {
+  services.postgresql = {
+    enable = true;
+    enableTCPIP = true;
+    package = pkgs.postgresql_15;
+    authentication = pkgs.lib.mkOverride 10 ''
+      local all all trust
+      host all all 127.0.0.1/32 trust
+      host all all ::1/128 trust
+      host all all 10.89.0.0/16 trust
+    '';
+    initialScript = pkgs.writeText "backend-initScript" ''
+      CREATE USER baserow WITH ENCRYPTED PASSWORD 'baserow';
+      CREATE DATABASE baserow;
+      ALTER DATABASE baserow OWNER to baserow;
+    '';
+  };
+  services.postgresqlBackup = {
+    enable = true;
+    startAt = "03:10:00";
+    databases = ["baserow"];
+  };
+  networking.firewall.allowedTCPPorts = [5432];
+}
@@ -0,0 +1,37 @@
+{pkgs, ...}: {
+  services.searx = {
+    enable = true;
+    package = pkgs.searxng;
+    settings = {
+      server.port = 3005;
+      server.secret_key = "@SEARX_SECRET_KEY@";
+      search.formats = ["html" "json"];
+    };
+  };
+  # Traefik configuration specific to searx
+  services.traefik.dynamicConfigOptions.http = {
+    services.searx.loadBalancer.servers = [
+      {
+        url = "http://localhost:3005/";
+      }
+    ];
+
+    routers.searx = {
+      rule = "Host(`search.m3ta.dev`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "searx";
+      entrypoints = "websecure";
+    };
+    routers.searx-old = {
+      rule = "Host(`search.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "searx";
+      entrypoints = "websecure";
+      middlewares = ["subdomain-redirect"];
+    };
+  };
+}
@@ -0,0 +1,45 @@
+{
+  config,
+  pkgs,
+  ...
+}: {
+  services.tailscale = {
+    enable = true;
+    useRoutingFeatures = "both";
+    authKeyFile = config.age.secrets.tailscale-key.path;
+    extraUpFlags = [
+      "--login-server=${config.services.headscale.settings.server_url}"
+      "--advertise-exit-node"
+      "--accept-routes"
+    ];
+  };
+
+  services.networkd-dispatcher = {
+    enable = true;
+    rules."50-tailscale" = {
+      onState = ["routable"];
+      script = ''
+        "${pkgs.ethtool} NETDEV=$(ip -o route get 8.8.8.8 | cut -f 5 -d " ") | -K $NETDEV rx-udp-gro-forwarding on rx-gro-list off
+      '';
+    };
+  };
+
+  boot.kernel.sysctl = {
+    "net.ipv4.ip_forward" = 1;
+    "net.ipv6.conf.all.forwarding" = 1;
+    "net.core.gro_normal_batch" = 8;
+    "net.core.gro_flush_timeout" = 200000;
+  };
+
+  networking.firewall = {
+    trustedInterfaces = ["tailscale0"];
+    allowedUDPPorts = [41641];
+    checkReversePath = "loose";
+  };
+
+  environment.systemPackages = with pkgs; [
+    ethtool
+    tailscale
+    networkd-dispatcher
+  ];
+}
@@ -0,0 +1,101 @@
+{config, ...}: {
+  services.traefik = {
+    enable = true;
+    staticConfigOptions = {
+      log = {level = "WARN";};
+      certificatesResolvers = {
+        godaddy = {
+          acme = {
+            email = "letsencrypt.org.btlc2@passmail.net";
+            storage = "/var/lib/traefik/acme.json";
+            caserver = "https://acme-v02.api.letsencrypt.org/directory";
+            dnsChallenge = {
+              provider = "godaddy";
+              resolvers = ["1.1.1.1:53" "8.8.8.8:53"];
+              propagation = {
+                delayBeforeChecks = 60;
+                disableChecks = true;
+              };
+            };
+          };
+        };
+      };
+      api = {};
+      entryPoints = {
+        web = {
+          address = ":80";
+          http.redirections.entryPoint = {
+            to = "websecure";
+            scheme = "https";
+          };
+        };
+        rtmp = {
+          address = ":1935";
+        };
+        rtmps = {
+          address = ":1945";
+        };
+        websecure = {
+          address = ":443";
+        };
+      };
+    };
+    dynamicConfigOptions = {
+      http = {
+        services = {
+          dummy = {
+            loadBalancer.servers = [
+              {url = "http://192.168.0.1";} # Diese URL wird nie verwendet
+            ];
+          };
+        };
+        middlewares = {
+          domain-redirect = {
+            redirectRegex = {
+              regex = "^https://www\\.m3tam3re\\.com(.*)";
+              replacement = "https://m3ta.dev$1";
+              permanent = true;
+            };
+          };
+          strip-www = {
+            redirectRegex = {
+              regex = "^https://www\\.(.+)";
+              replacement = "https://$1";
+              permanent = true;
+            };
+          };
+          subdomain-redirect = {
+            redirectRegex = {
+              regex = "^https://([a-zA-Z0-9-]+)\\.m3tam3re\\.com(.*)";
+              replacement = "https://$1.m3ta.dev$2";
+              permanent = true;
+            };
+          };
+          auth = {
+            basicAuth = {
+              users = ["m3tam3re:$apr1$1xqdta2b$DIVNvvp5iTUGNccJjguKh."];
+            };
+          };
+        };
+
+        routers = {
+          api = {
+            rule = "Host(`r.m3tam3re.com`)";
+            service = "api@internal";
+            middlewares = ["auth"];
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+        };
+      };
+    };
+  };
+
+  systemd.services.traefik.serviceConfig = {
+    EnvironmentFile = ["${config.age.secrets.traefik.path}"];
+  };
+
+  networking.firewall.allowedTCPPorts = [80 443];
+}
@@ -0,0 +1,37 @@
+{
+  services.wastebin = {
+    enable = true;
+    settings = {
+      WASTEBIN_TITLE = "m3tam3re's wastebin";
+      WASTEBIN_BASE_URL = "https://bin.m3ta.dev";
+      WASTEBIN_ADDRESS_PORT = "0.0.0.0:3003";
+      WASTEBIN_MAX_BODY_SIZE = 1048576;
+    };
+  };
+  # Traefik configuration specific to wastebin
+  services.traefik.dynamicConfigOptions.http = {
+    services.wastebin.loadBalancer.servers = [
+      {
+        url = "http://localhost:3003/";
+      }
+    ];
+
+    routers.wastebin = {
+      rule = "Host(`bin.m3ta.dev`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "wastebin";
+      entrypoints = "websecure";
+    };
+    routers.wastebin-old = {
+      rule = "Host(`bin.m3tam3re.com`)";
+      tls = {
+        certResolver = "godaddy";
+      };
+      service = "wastebin";
+      entrypoints = "websecure";
+      middlewares = ["subdomain-redirect"];
+    };
+  };
+}
@@ -0,0 +1,111 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+{pkgs, ...}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./disko-config.nix
+    ./hardware-configuration.nix
+  ];
+
+  # Bootloader.
+  boot.loader.grub = {
+    efiSupport = true;
+    efiInstallAsRemovable = true;
+  };
+
+  networking.hostName = "m3-helios"; # Define your hostname.
+  networking.hostId = "3ebf1cd3";
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable =
+    true; # Easiest to use and most distros use this by default.
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Enable the GNOME Desktop Environment.
+  # services.xserver.displayManager.gdm.enable = true;
+  # services.xserver.desktopManager.gnome.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [neovim git];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+  services.fstrim = {
+    enable = true; # For SSD/thin-provisioned storage
+    interval = "weekly";
+  };
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.11"; # Did you read the comment?
+}
@@ -0,0 +1,50 @@
+# A staring point is the basic NIXOS configuration generated by the ISO installer.
+# On an existing NIXOS install you can use the following command in your flakes basedir:
+# sudo nixos-generate-config --dir ./hosts/m3tam3re
+#
+# Please make sure to change the first couple of lines in your configuration.nix:
+# { config, inputs, ouputs, lib, pkgs, ... }:
+#
+# {
+#   imports = [ # Include the results of the hardware scan.
+#     ./hardware-configuration.nix
+#     inputs.home-manager.nixosModules.home-manager
+#   ];
+#   ...
+#
+# Moreover please update the packages option in your user configuration and add the home-manager options:
+# users.users = {
+#   m3tam3re = {
+#     isNormalUser = true;
+#     initialPassword = "12345";
+#     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+#     packages = [ inputs.home-manager.packages.${pkgs.system}.default ];
+#   };
+# };
+#
+# home-manager = {
+#   useUserPackages = true;
+#   extraSpecialArgs = { inherit inputs outputs; };
+#   users.m3tam3re =
+#     import ../../home/m3tam3re/${config.networking.hostName}.nix;
+# };
+#
+# Please also change your hostname accordingly:
+#:w
+# networking.hostName = "nixos"; # Define your hostname.
+{
+  imports = [
+    ../common
+    ./configuration.nix
+    ./programs.nix
+    ./secrets.nix
+    ./services
+  ];
+
+  extraServices = {
+    flatpak.enable = true;
+    ollama.enable = false;
+    podman.enable = true;
+    virtualisation.enable = false;
+  };
+}
@@ -0,0 +1,39 @@
+{
+  disko.devices = {
+    disk = {
+      main = {
+        type = "disk";
+        device = "/dev/sda";
+        content = {
+          type = "gpt";
+          partitions = {
+            boot = {
+              size = "1M";
+              type = "EF02"; # for GRUB MBR
+              priority = 1;
+            };
+            esp = {
+              size = "512M";
+              type = "EF00";
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+                mountOptions = ["defaults" "umask=0077"];
+              };
+            };
+            root = {
+              size = "100%";
+              content = {
+                type = "filesystem";
+                format = "ext4";
+                mountpoint = "/";
+                mountOptions = ["noatime" "nodiratime" "discard"];
+              };
+            };
+          };
+        };
+      };
+    };
+  };
+}
@@ -0,0 +1,24 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "virtio_scsi" "sd_mod" "sr_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}
@@ -0,0 +1,14 @@
+{pkgs, ...}: {
+  programs.nix-ld.enable = true;
+  programs.nix-ld.libraries = with pkgs; [
+    # Add any missing dynamic libraries for unpackaged programs
+    # here, NOT in environment.systemPackages
+  ];
+  programs.fish.enable = true;
+  programs.nh = {
+    enable = true;
+    clean.enable = true;
+    clean.extraArgs = "--keep-since 4d --keep 3";
+    flake = "/home/m3tam3re/p/nixos/nixos-config";
+  };
+}
@@ -0,0 +1,15 @@
+{
+  age = {
+    secrets = {
+      traefik = {
+        file = ../../secrets/traefik.age;
+        mode = "770";
+        owner = "traefik";
+      };
+      m3tam3re-secrets = {
+        file = ../../secrets/m3tam3re-secrets.age;
+        owner = "m3tam3re";
+      };
+    };
+  };
+}
@@ -0,0 +1,25 @@
+{
+  services.adguardhome = {
+    enable = true;
+    openFirewall = true;
+    settings = {
+      dns = {
+        port = 53;
+        upstream_dns = [
+          "1.1.1.1"
+          "8.8.8.8"
+        ];
+      };
+      filtering = {
+        rewrites = [
+          {
+            domain = "*.l.m3tam3re.com";
+            answer = "192.168.178.210";
+          }
+        ];
+      };
+    };
+  };
+  networking.firewall.allowedTCPPorts = [53];
+  networking.firewall.allowedUDPPorts = [53];
+}
@@ -0,0 +1,5 @@
+{
+  imports = [
+    ./homarr.nix
+  ];
+}
@@ -0,0 +1,11 @@
+{
+  virtualisation.oci-containers.containers."homarr" = {
+    image = "ghcr.io/ajnart/homarr:latest";
+    ports = ["7575:7575"];
+    volumes = [
+      "homarr-configs:/app/data/configs"
+      "homarr-icons:/app/public/icons"
+      "homarr-data:/data"
+    ];
+  };
+}
@@ -0,0 +1,13 @@
+{
+  imports = [
+    ./adguard.nix
+    ./containers
+    ./traefik.nix
+  ];
+  systemd.sleep.extraConfig = ''
+    AllowSuspend=no
+    AllowHibernation=no
+    AllowHybridSleep=no
+    AllowSuspendThenHibernate=no
+  '';
+}
@@ -0,0 +1,152 @@
+{config, ...}: {
+  services.traefik = {
+    enable = true;
+    staticConfigOptions = {
+      log = {level = "WARN";};
+      certificatesResolvers = {
+        godaddy = {
+          acme = {
+            email = "letsencrypt.org.btlc2@passmail.net";
+            storage = "/var/lib/traefik/acme.json";
+            caserver = "https://acme-v02.api.letsencrypt.org/directory";
+            dnsChallenge = {
+              provider = "godaddy";
+            };
+          };
+        };
+      };
+      api = {};
+      entryPoints = {
+        web = {
+          address = ":80";
+          http.redirections.entryPoint = {
+            to = "websecure";
+            scheme = "https";
+          };
+        };
+        websecure = {address = ":443";};
+      };
+    };
+    dynamicConfigOptions = {
+      http = {
+        middlewares = {
+          auth = {
+            basicAuth = {
+              users = ["m3tam3re:$apr1$1xqdta2b$DIVNvvp5iTUGNccJjguKh."];
+            };
+          };
+          default-headers = {
+            headers = {
+              frameDeny = "true";
+              browserXssFilter = "true";
+              contentTypeNosniff = "true";
+              forceSTSHeader = "true";
+              stsIncludeSubdomains = true;
+              stsPreload = true;
+              stsSeconds = 15552000;
+              customFrameOptionsValue = "SAMEORIGIN";
+              customResponseHeaders = {
+                X-Forwarded-Proto = "https";
+              };
+            };
+          };
+          default-whitelist = {
+            ipAllowList = {
+              sourceRange = ["10.0.0.0/8" "192.168.178.0/16"];
+            };
+          };
+          secured = {
+            chain = {
+              middlewares = ["default-headers" "default-whitelist"];
+            };
+          };
+        };
+
+        services = {
+          m3-prox-1.loadBalancer = {
+            servers = [
+              {url = "https://192.168.178.200:8006";}
+            ];
+            passHostHeader = true;
+            serversTransport = "pve";
+          };
+          ag.loadBalancer.servers = [
+            {url = "http://192.168.178.210:3000";}
+          ];
+          homarr.loadBalancer.servers = [
+            {url = "http://192.168.178.210:7575";}
+          ];
+          plex.loadBalancer.servers = [
+            {url = "http://192.168.178.175:32400";}
+          ];
+          skynet.loadBalancer.servers = [
+            {url = "http://192.168.178.175:5000";}
+          ];
+        };
+        # Skip verification for PVE servers
+        serversTransports = {
+          pve = {insecureSkipVerify = true;};
+        };
+
+        routers = {
+          api = {
+            rule = "Host(`traefik.l.m3tam3re.com`)";
+            service = "api@internal";
+            middlewares = ["auth"];
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+          m3-prox-1 = {
+            rule = "Host(`m3-prox-1.l.m3tam3re.com`)";
+            service = "m3-prox-1";
+            middlewares = ["default-headers"];
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+          ag = {
+            rule = "Host(`ag.l.m3tam3re.com`)";
+            service = "ag";
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+          homarr = {
+            rule = "Host(`dash.l.m3tam3re.com`)";
+            service = "homarr";
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+          plex = {
+            rule = "Host(`plex.l.m3tam3re.com`)";
+            service = "plex";
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+          skynet = {
+            rule = "Host(`skynet.l.m3tam3re.com`)";
+            service = "homarr";
+            entrypoints = ["websecure"];
+            tls = {
+              certResolver = "godaddy";
+            };
+          };
+        };
+      };
+    };
+  };
+
+  systemd.services.traefik.serviceConfig = {
+    EnvironmentFile = ["${config.age.secrets.traefik.path}"];
+  };
+
+  networking.firewall.allowedTCPPorts = [80 443];
+}
@@ -0,0 +1,125 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+{pkgs, ...}: {
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];
+
+  # Use the systemd-boot EFI boot loader.
+  boot.supportedFilesystems = ["zfs"];
+  boot.zfs.package = pkgs.zfs_unstable;
+  boot.zfs.forceImportAll = true;
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+  boot.initrd.kernelModules = ["amdgpu"];
+
+  services.xserver.videoDrivers = ["amdgpu"];
+  security.polkit.enable = true;
+  security.pam.services.gdm.enableGnomeKeyring = true;
+  networking.hostName = "m3-kratos"; # Define your hostname.
+  networking.hostId = "458bd616";
+  # networking.extraHosts = ''
+  #   127.0.0.1 releases.warp.dev
+  #   127.0.0.1 app.warp.dev
+  # '';
+  # Pick only one of the below networking options.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.networkmanager.enable =
+    true; # Easiest to use and most distros use this by default.
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+  # console = {
+  #   font = "Lat2-Terminus16";
+  #   keyMap = "us";
+  #   useXkbConfig = true; # use xkb.options in tty.
+  # };
+
+  # Enable the X11 windowing system.
+  # services.xserver.enable = true;
+
+  # Enable the GNOME Desktop Environment.
+  # services.xserver.displayManager.gdm.enable = true;
+  # services.xserver.desktopManager.gnome.enable = true;
+
+  # Configure keymap in X11
+  # services.xserver.xkb.layout = "us";
+  # services.xserver.xkb.options = "eurosign:e,caps:escape";
+
+  # Enable CUPS to print documents.
+  # services.printing.enable = true;
+
+  # Enable sound.
+  # hardware.pulseaudio.enable = true;
+  # OR
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.libinput.enable = true;
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [neovim git n8n];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh = {
+    enable = true;
+    settings.PermitRootLogin = "no";
+    settings = {
+      PasswordAuthentication = false;
+    };
+  };
+  services.fstrim.enable = true;
+
+  services.zfs.autoSnapshot.enable = true;
+  services.zfs.autoScrub.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # Copy the NixOS configuration file and link it from the resulting system
+  # (/run/current-system/configuration.nix). This is useful in case you
+  # accidentally delete configuration.nix.
+  # system.copySystemConfiguration = true;
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "24.11"; # Did you read the comment?
+}
@@ -0,0 +1,57 @@
+# A staring point is the basic NIXOS configuration generated by the ISO installer.
+# On an existing NIXOS install you can use the following command in your flakes basedir:
+# sudo nixos-generate-config --dir ./hosts/m3tam3re
+#
+# Please make sure to change the first couple of lines in your configuration.nix:
+# { config, inputs, ouputs, lib, pkgs, ... }:
+#
+# {
+#   imports = [ # Include the results of the hardware scan.
+#     ./hardware-configuration.nix
+#     inputs.home-manager.nixosModules.home-manager
+#   ];
+#   ...
+#
+# Moreover please update the packages option in your user configuration and add the home-manager options:
+# users.users = {
+#   m3tam3re = {
+#     isNormalUser = true;
+#     initialPassword = "12345";
+#     extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+#     packages = [ inputs.home-manager.packages.${pkgs.system}.default ];
+#   };
+# };
+#
+# home-manager = {
+#   useUserPackages = true;
+#   extraSpecialArgs = { inherit inputs outputs; };
+#   users.m3tam3re =
+#     import ../../home/m3tam3re/${config.networking.hostName}.nix;
+# };
+#
+# Please also change your hostname accordingly:
+#:w
+# networking.hostName = "nixos"; # Define your hostname.
+{
+  imports = [
+    ../common
+    ./configuration.nix
+    ./hardware.nix
+    ./programs.nix
+    ./secrets.nix
+    ./services
+  ];
+
+  extraServices = {
+    flatpak.enable = true;
+    ollama.enable = true;
+    podman.enable = true;
+    virtualisation.enable = true;
+  };
+  services.ollama = {
+    environmentVariables = {
+      HCC_AMDGPU_TARGET = "gfx1100";
+    };
+    rocmOverrideGfx = "11.0.0";
+  };
+}
@@ -0,0 +1,80 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  modulesPath,
+  ...
+}: {
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = ["nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod"];
+  boot.initrd.kernelModules = [];
+  boot.kernelModules = ["kvm-amd"];
+  boot.extraModulePackages = [];
+  boot.supportedFilesystems = ["nfs"];
+
+  fileSystems."/" = {
+    device = "rpool/root";
+    fsType = "zfs";
+  };
+
+  fileSystems."/nix" = {
+    device = "rpool/nix";
+    fsType = "zfs";
+  };
+
+  fileSystems."/home" = {
+    device = "rpool/home";
+    fsType = "zfs";
+  };
+
+  fileSystems."/var" = {
+    device = "rpool/var";
+    fsType = "zfs";
+  };
+
+  fileSystems."/tmp" = {
+    device = "rpool/tmp";
+    fsType = "zfs";
+  };
+
+  fileSystems."/var/log" = {
+    device = "rpool/var/log";
+    fsType = "zfs";
+  };
+
+  fileSystems."/var/tmp" = {
+    device = "rpool/var/tmp";
+    fsType = "zfs";
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/2FE7-15B4";
+    fsType = "vfat";
+    options = ["fmask=0022" "dmask=0022"];
+  };
+
+  fileSystems."/mnt/skynet" = {
+    device = "192.168.1.100:/volume3/m3-skynet";
+    fsType = "nfs";
+    options = ["noauto" "x-systemd.automount"];
+  };
+
+  swapDevices = [];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.eno1.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp16s0u1u4u5.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp11s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}
@@ -0,0 +1,8 @@
+{
+  hardware = {
+    amdgpu.opencl.enable = true;
+    bluetooth.enable = true;
+    keyboard.zsa.enable = true;
+    graphics.enable = true;
+  };
+}
@@ -0,0 +1,52 @@
+{pkgs, ...}: {
+  programs.nix-ld.enable = true;
+  programs.nix-ld.libraries = with pkgs; [
+    # Add any missing dynamic libraries for unpackaged programs
+    # here, NOT in environment.systemPackages
+  ];
+  programs.adb.enable = true;
+  programs.hyprland = {
+    enable = true;
+    xwayland.enable = true;
+    withUWSM = true;
+  };
+  programs.gamescope = {
+    enable = true;
+    capSysNice = true;
+  };
+  programs.steam = {
+    enable = true;
+    remotePlay.openFirewall = true;
+    dedicatedServer.openFirewall = true;
+    gamescopeSession.enable = true;
+  };
+  programs.obs-studio = {
+    enable = true;
+    enableVirtualCamera = true;
+    plugins = with pkgs.obs-studio-plugins; [
+      obs-composite-blur
+      obs-vaapi
+      obs-vertical-canvas
+      obs-vkcapture
+      obs-webkitgtk
+      wlrobs
+    ];
+  };
+  programs.fish.enable = true;
+  programs.thunar = {
+    enable = true;
+    plugins = with pkgs.xfce; [thunar-archive-plugin thunar-volman];
+  };
+  programs.gnupg.agent = {
+    enable = true;
+    enableSSHSupport = true;
+    pinentryPackage = pkgs.pinentry-gnome3;
+    settings = {default-cache-ttl = 10800;};
+  };
+  programs.nh = {
+    enable = true;
+    clean.enable = true;
+    clean.extraArgs = "--keep-since 4d --keep 3";
+    flake = "/home/m3tam3re/p/nixos/nixos-config";
+  };
+}
@@ -0,0 +1,31 @@
+{
+  age = {
+    secrets = {
+      wg-DE = {
+        file = ../../secrets/wg-DE.age;
+        path = "/etc/wireguard/DE.conf";
+      };
+      wg-NL = {
+        file = ../../secrets/wg-NL.age;
+        path = "/etc/wireguard/NL.conf";
+      };
+      wg-NO = {
+        file = ../../secrets/wg-NO.age;
+        path = "/etc/wireguard/NO.conf";
+      };
+      wg-US = {
+        file = ../../secrets/wg-US.age;
+        path = "/etc/wireguard/US.conf";
+      };
+      wg-BR = {
+        file = ../../secrets/wg-BR.age;
+        path = "/etc/wireguard/BR.conf";
+      };
+      tailscale-key.file = ../../secrets/tailscale-key.age;
+      m3tam3re-secrets = {
+        file = ../../secrets/m3tam3re-secrets.age;
+        owner = "m3tam3re";
+      };
+    };
+  };
+}
@@ -0,0 +1,4 @@
+{
+  imports = [
+  ];
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
m3tam3re	ad87c67161	Headscale and Tailscale config modules	2025-05-05 11:44:32 +02:00
m3tam3re	53ce9740bd	nushell dir_fuzzy	2025-05-05 01:58:36 +02:00
m3tam3re	881a65263d	+skim functions for nushell	2025-05-04 19:00:11 +02:00
m3tam3re	32503965ab	+Nushell	2025-05-04 10:53:18 +02:00
m3tam3re	3d52c0576e	-fastfetch;+nitch	2025-04-30 14:47:05 +02:00
m3tam3re	cc38372ee0	experimental msty-sidecar	2025-04-29 15:05:08 +02:00
m3tam3re	e461fc494a	flake update; msty update; +headscale config	2025-04-29 13:36:01 +02:00
m3tam3re	5a5b434efd	m3ta.dev www fix for traefik	2025-04-24 16:57:30 +02:00
m3tam3re	d69a9b9b38	+ work-timer	2025-04-21 15:00:21 +02:00
m3tam3re	b6e8a1614b	traefik domain redirects	2025-04-18 15:59:06 +02:00
m3tam3re	f560c59be5	+code2prompt, removed temprorary overlays	2025-04-18 10:53:05 +02:00
m3tam3re	01a2cbc808	m3-atlas: n8n - nixos, ghost update	2025-04-16 14:06:02 +02:00
m3tam3re	9b6e6a6992	flake update	2025-04-15 09:41:22 +02:00
m3tam3re	02f8b6d787	+ssh config zed for self-host-playbook	2025-04-10 19:16:46 +02:00
m3tam3re	40d6c9692a	flake update	2025-04-10 11:36:42 +02:00
m3tam3re	374a17e6fc	+experimental pangolin config for m3-atlas	2025-04-07 19:45:20 +02:00
m3tam3re	b1e1a95a1c	flake update	2025-03-28 11:32:08 +01:00
m3tam3re	74e7ee8364	lock OVMF	2025-03-28 10:00:43 +01:00
m3tam3re	c32a94b82c	Hyprland config change due to 0.48 update	2025-03-27 09:29:24 +01:00
m3tam3re	0e6ea2bacb	n8n override fix	2025-03-26 12:24:36 +01:00
m3tam3re	8a2b5438af	+vivaldi flake update	2025-03-26 11:54:49 +01:00
m3tam3re	81ee763318	flatpak fix attempt	2025-03-26 06:12:35 +01:00
m3tam3re	1c0b67c2a0	Update flake.lock	2025-03-24 13:05:41 +01:00
m3tam3re	42aa44a56b	obs-browser	2025-03-24 13:05:28 +01:00
m3tam3re	466cbaf048	n8n-env, obs-plugins	2025-03-18 11:56:09 +01:00
m3tam3re	b47e20afad	flake update / brave fix	2025-03-18 09:32:28 +01:00
m3tam3re	e93bdf20a3	restreamer setup	2025-03-15 14:23:47 +01:00
m3tam3re	779473317d	+matomo	2025-03-14 17:32:08 +01:00
m3tam3re	39782b6eb9	flake update	2025-03-14 10:52:22 +01:00
m3tam3re	960ea9503d	flake update	2025-03-13 11:30:48 +01:00
m3tam3re	df41024693	playbook ssh config	2025-03-12 14:20:44 +01:00
m3tam3re	73fd3ef108	flake update	2025-03-10 09:37:17 +01:00
m3tam3re	221ffed715	let's try warp	2025-03-05 09:23:39 +01:00
m3tam3re	3637aee724	+warp-terminal	2025-03-04 23:27:10 +01:00
m3tam3re	c0e8cfd773	msty fix licensing	2025-03-04 14:54:59 +01:00
m3tam3re	ede0af92cd	fix msty license persistence	2025-03-04 06:14:49 +01:00
m3tam3re	f812a1de83	secrets update	2025-03-03 10:16:17 +01:00
m3tam3re	eb84e24369	+MSTY	2025-03-02 16:14:43 +01:00
m3tam3re	d51894816c	pin to fix anytype error	2025-03-01 15:43:00 +01:00
m3tam3re	c7fb70c88d	neofetch to fastfetch	2025-03-01 15:01:19 +01:00
m3tam3re	2db7d8c1fd	+slash	2025-02-28 15:56:53 +01:00
m3tam3re	ce168609ca	flake update	2025-02-28 09:55:27 +01:00
m3tam3re	842b01b647	n8n-env-fix	2025-02-24 14:57:19 +01:00
m3tam3re	fa734b5c85	ghost-env-fix	2025-02-24 14:51:43 +01:00
m3tam3re	a4d8d6890c	+crypto	2025-02-24 09:48:13 +01:00
m3tam3re	262902c018	n8n@m3-atlas	2025-02-23 19:07:14 +01:00
m3tam3re	2ffd84eb4e	ssh_config	2025-02-22 11:03:03 +01:00
m3tam3re	39e1187948	headscale + tailscale	2025-02-21 14:07:29 +01:00
m3tam3re	74d4940e27	traffic dns fix	2025-02-20 15:47:16 +01:00
m3tam3re	25b1fa76d7	flake update	2025-02-18 19:39:32 +01:00
m3tam3re	b281290bef	flake update	2025-02-18 19:37:50 +01:00
m3tam3re	e02d76f981	+NFS	2025-02-17 06:44:42 +01:00
m3tam3re	9bcb33e58a	@zed config changes	2025-02-17 06:36:50 +01:00
m3tam3re	994f7f6f74	NFS @m3-kratos	2025-02-15 14:08:39 +01:00
m3tam3re	e98e224af9	merge	2025-02-14 13:53:28 +01:00
m3tam3re	b2e01747e5	flake update	2025-02-14 13:44:29 +01:00
m3tam3re	75ae18b73e	@n8n updatr to 1.78	2025-02-14 09:32:40 +01:00
m3tam3re	4a48ee92cb	@hyprland +uwsm	2025-02-12 18:10:26 +01:00
m3tam3re	e0dda1eb0a	@hyprland +uwsm	2025-02-12 11:12:32 +01:00
m3tam3re	bd97658bd2	steam stuff @m3-ares	2025-02-06 06:44:21 +01:00
m3tam3re	8785824cde	+some python stuff	2025-02-05 13:17:58 +01:00
m3tam3re	f5ca531962	+s3 @m3-atlas	2025-02-03 18:37:07 +01:00
m3tam3re	446be80ef1	+nfs mount @m3-atlas	2025-02-03 17:54:53 +01:00
m3tam3re	28ab56d302	n8n@1.77 / pnpm_9	2025-02-03 08:25:49 +01:00
m3tam3re	190fb2d6d1	flake update	2025-02-02 15:41:21 +01:00
m3tam3re	e4b87c6908	rocblas workaround	2025-01-28 09:57:26 +01:00
m3tam3re	65a69df52b	flake update, -n8n @m3-ares	2025-01-28 09:09:17 +01:00
m3tam3re	e75166e5fc	+onsomnia	2025-01-26 12:32:28 +01:00
m3tam3re	c18b2d1f94	-spotify	2025-01-25 13:16:10 +01:00
m3tam3re	a39436da6f	m3-ares: fix early boot lvm warning	2025-01-24 14:58:44 +01:00
m3tam3re	05c614d3b1	+ollama AMD fix, ... rollback	2025-01-24 14:54:19 +01:00
m3tam3re	b3c4a9b3ba	-ollama AMD fix, not needed anymore	2025-01-21 10:04:14 +01:00
m3tam3re	4c0c2181ef	postgres initialScript redundancy removed	2025-01-20 11:36:17 +01:00
m3tam3re	6606d63a20	postgres settings m3-kratos	2025-01-16 15:19:29 +01:00
m3tam3re	38187bc92c	+m3-atlas	2025-01-15 18:19:03 +01:00
m3tam3re	4f39502228	secrets rekey	2025-01-15 09:45:56 +01:00
m3tam3re	5e128fb2bc	gamecope fix m3-ares	2025-01-13 09:13:01 +01:00
m3tam3re	85515be4f0	gamecope fix m3-ares	2025-01-11 06:38:42 +01:00
m3tam3re	a9453ed3a0	flake update	2025-01-09 10:04:13 +01:00
m3tam3re	61588df0b3	+gamescope	2025-01-08 14:35:09 +01:00
m3tam3re	e94c5d4df8	gamecope m3-ares	2025-01-08 08:58:29 +01:00
m3tam3re	5c2ba374f9	-tuxedo drivers	2024-12-16 11:28:41 +01:00
m3tam3re	0d7efd1c33	+gamescope	2024-12-16 09:16:54 +01:00
m3tam3re	157fc4d38c	+upower for m3-ares	2024-12-10 10:23:05 +01:00
m3tam3re	4c9988a7af	+ libgtop	2024-12-10 09:50:56 +01:00
m3tam3re	24a7fa1313	-Hyprpanel overlay	2024-12-06 11:48:19 +01:00
m3tam3re	2b6fc478ff	+2505 flake update	2024-12-06 11:13:40 +01:00
m3tam3re	4789069624	+hyprcursor	2024-12-06 10:16:17 +01:00
m3tam3re	2f970debdd	merge m3-ares	2024-12-06 10:14:48 +01:00
m3tam3re	12a3620712	+m3-ares	2024-12-06 07:16:50 +01:00
m3tam3re	6ff2466245	-llm-plugins	2024-11-27 11:45:16 +01:00
m3tam3re	50332e55e8	ollama rocm gpu fix	2024-11-25 14:59:34 +01:00
m3tam3re	1251081494	+tailwindcss	2024-11-22 08:54:24 +01:00
m3tam3re	e16566bf09	+git alias logd	2024-11-21 13:59:31 +01:00
m3tam3re	ccca2ab4ff	+difftastic	2024-11-21 12:50:31 +01:00
m3tam3re	0007b10a71	+homarr config fix	2024-11-20 12:37:05 +01:00
m3tam3re	0fde93d646	+homarr	2024-11-19 18:59:45 +01:00
m3tam3re	936b6b5c9b	adguard dns rewrites	2024-11-18 11:58:22 +01:00
m3tam3re	657df4e92b	traefik config	2024-11-18 10:29:41 +01:00
m3tam3re	1864141a1b	*basic traefik	2024-11-17 18:29:52 +01:00
m3tam3re	79df3dd5c7	+m3-helios	2024-11-16 19:58:59 +01:00
m3tam3re	431188a943	+podman socker	2024-11-14 15:13:14 +01:00
m3tam3re	0ebf64e7ee	+qdrant +wireguard	2024-11-14 12:17:43 +01:00
m3tam3re	ff3d1735c0	+postgres n8n@1.66.0	2024-11-13 10:51:59 +01:00
m3tam3re	8912665aa6	+aider-chat-env	2024-11-11 10:46:17 +01:00
m3tam3re	2c6c92140f	pinned nixos commit change	2024-11-08 19:02:50 +01:00
m3tam3re	74f93cb0e3	+hyprpanel	2024-11-07 13:35:17 +01:00
m3tam3re	6b24828482	0711	2024-11-07 10:50:13 +01:00
m3tam3re	5c0ad5d634	here we go	2024-10-20 00:30:58 +02:00